PHOTOTEX EXS HIGH TACK FABRIC PAPER 6 MIL 1YR

Description

PHOTOTEX EXS HIGH TACK FABRIC PAPER 6 MIL 1YR

• 6 mil pressure sensitive permanent fabric polyester paper with a very high tack adhesive
• Same great benefits as traditional Phototex but with 50% stronger adhesive for cement, brick, outdoor stadiums, eggshell paint or textured surfaces
• 1 year outdoor durability when laminated with Clear Shield Original liquid laminate
• Print Compatibility: : Solvent, Eco Solvent, UV and Latex, UV

This US Patented Adhesive Fabric Media: Photo Tex & Photo Tex (S) is compatible with pigment, water based, solvent, eco-solvent, latex, and UV- inks. (See below for specific compatibility with inks) Photo Tex gives you vivid, sharp print results with brilliant colors! The Adhesive is Re-movable, Re-usable and Re-positional. Photo Tex’s characteristics separate itself from all other products on the market using vinyl or similar fabrics. We stick to virtually any pa int ed surface (in all weather and room temperature changes), and can be easily removed with a 99% guarantee the surface will be residue free. The material does not rip or wrinkle and is not required to be removed over a certain period of time. Results will vary on stucco and eggshell painted surfaces (use our *EX/EXS/OPA or OPAS versions for best results). Not recommended for brick, non-painted cement surfaces, or heavy painted spackled wall board (*EX/EXS version may work in certain cases). Make sure you allow 30-days on newly painted surfaces for out-gassing (to prevent bubbling) and all walls MUST have been primed (to prevent issues). Also, always check the heat setting on UV and UV curable printers to avoid over heating the adhesive, and altering its tack. Do not oversaturate UV inks and in certain cases you may need to leave a small boarder – again, only UV inks and more important UV Curable should be tested in house first. See disclaimer at www.phototexgroup.com