Water-Resistant 15 mil “Thrifty” Scrim Banner




Water-Resistant 15 mil “Thrifty” Scrim Banner

Now with Prelume® for whiter finish. Non opaque banner. For best results use pigmented inks.

Water-Resistant 15 mil “Thrifty” Banner
for Water-Based Inkjet Printers
• Scrim-reinforced vinyl designed to create cost-effective graphics
• Great for banner jobs when economy and quality is needed
Product Number: KJWPBANNER
Material: Tear-resistant polyester fabric embedded between two
white vinyl layer
Caliper/Gauge: 15 mil
Weight: 445 g/m2
Opacity: >85
Brightness: >120
Gloss Level: 2 (avg) @ 60°
Printer/Ink Compatibility:
Encad, ColorSpan, Hewlett-Packard, Mimaki, Roland and Epson series dye & pigment-based inks
Saturation level of this product is 250% and heavy coated paper setting in most RIPs is
Ink Dry Time: Varies with type and amount of ink, relative humidity
and temperature.
Printing: 60-80° F, 50% Relative Humidity
Ideal Storage Conditions: 70° F (21° C), 50% Relative Humidity, store in original
Handling Requirements: Due to absorptive nature of the coating, avoid
touching the coated surface with bare skin. Always
wear cotton gloves when handling inkjet-coated
materials. Rolls are supplied withthe coated surface
wound out. When rolling graphics, always roll so that the
thinner material is on the outside surface of roll.
Life Expectancy: Outdoor – up to 6 months without lamination.
Shelf Life: 1 year from ship date when stored in proper conditions.

Finishing/Lamination: Always use pressure sensitive laminates
Before applying laminate, allow image to dry for 24

Additional information


, , ,

Ink Type

Product Type

Media Type


Surface Finish





There are no reviews yet.

Be the first to review “Water-Resistant 15 mil “Thrifty” Scrim Banner”

Your email address will not be published.

Free Shipping Same Day oversized items excluded, Rush shipping availableDistribution Locations