SEAL® Pure Color VersaFabric
SEAL® Pure Color VersaFabric, a 7.1 oz/yd2, 100% polyester fabric with a specialty coating, is one of the most versatile fabrics on the market today. It is an excellent choice for both indoor and outdoor applications where color, wrinkle resistance and drape are important. VersaFabric provides sharp image reproduction and brilliant color finish for dramatic trade show pop-up and soft image displays, store signage, murals, POP displays, tent sides and theatrical backdrops. Its NFPA 701 fire rating allows it to be used in public areas. This fabric is performance designed for use with most solvent, eco-solvent, latex and UV printers. VersaFabric is available in widths up to 98 inches.
Properties at a Glance
Weight 7.1 oz/yd2 (240 gsm)
Gloss level Semi-Matte
Thickness 16 mil (415 ?)
Tear strength 150/300 N/15mm
Fire rating NFPA 701
Thread 100% polyester
Weave tight, dense
Outdoor durability – six months
Roll-Up, pop-up, soft image displays
Trade show graphics
Roland excellent compatibility with solvent & eco solvent printers.
HP excellent compatibility with solvent, eco solvent and latex printers.
Mimaki excellent compatibility with solvent & eco solvent printers.
Mutoh excellent compatibility with solvent & eco solvent printers.
UV cure printers – compatibility with roll-roll and hybrid printers. Test for vacuum seal on flat bed
Printer Setting Suggestions
Pre, platen, and post heat, use the highest setting available (typically 50ºC).
Print uni-directional and 720 x 1440 dpi, or higher, for best resolution and color density.
Use 720 x 720 dpi for production and graphics that will be viewed from a distance.
Use a cast vinyl profile and high quality setting as a starting point.
For best color matching results create a profile see www.neschenbrands.com for available
Product Reference Sheet
Neschen® Pure Color Media
Features Advantages Benefits
Wrinkle & crease
Graphics can be reused multiple times
for trade show displays & signage
Saves money by not having to reprint
Fire resistant Meets NFPA 701 Allows product to be used in public
Soft hand Provides a sophisticated textile look &
Drapes like a textile
Outdoor durability Only need to stock 1 product
Multiple product applications
Can use this product in any
Versatility Inventory relief only stock one
One media for various applications will
Wide color gamut Greater range of printing possibilities Better images, less waste
Cutting product can be cut with fabric scissors and will not fray, but for best results use a heat
knife and blade (Neschen item # 600HSG0 & 600H205) on glass or other heat resistant surface
with a metal ruler to seal the edges.
Sewing use polyester thread to prevent material puckering.
Hemming Tape banner tape can be used in place of stitching, check for adhesive compatibility
with fabric as some adhesives do not stick well to fabric. Tape may affect fire retardant properties.
Cleaning if graphic becomes soiled, use a lint-free, clean cloth with warm soapy water and
gently rub the affected areas. Do not immerse in water or use cleaning products as these can
damage the graphic. Test all cleaning procedures on a small inconspicuous area (or on a
previously printed test print) so that it does not affect the graphic. Rubbing wet ink may cause
Wrinkle Removal the best way to eliminate any wrinkles that form during transport or storage of
the graphic is with a handheld steamer. Use the setting recommended for polyester fabrics and
apply the steam to the back side of the graphic.
Outdoor displays – secure graphic to prevent wind damage.
Store unused media in the plastic over wrap to protect it from humidity changes and
contaminants. Store media on an even flat surface to prevent dents that may affect imaging
performance. Media may also be stored standing on end or on a media caddy.
60º to 80ºF and 40 to 65% RH
o Product should be used within one year when stored at above conditions.