Description
ORAJET 3640
ORAJET 3640
3 Mil Economy Grade Matte or Gloss White Vinyl With Permanent Adhesive.
• 4 Year outdoor durability.
• Clear, permanent, water-based adhesive.
• 83lb silicone-coated paper liner.
• Great for interior or exterior signage, decals, nameplates, die-cut letters and POP’s.
• ORACAL suggests laminating with Oraguard 200 or 210.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex, Screen Print.
ORAJET
3640 2011/04
Description
Soft PVC film white, gloss and matt surface, and transparent, gloss and matt surface
Release paper
Silicone coated paper, 135 g/m²
Adhesive
Polyacrylate, permanent, transparent
Area of use
For brilliant and colourful short- and medium-term outdoor applications
Thickness* 80 micron
Dimensional stability adhered to steel, no shrinkage in cross direction, in length 0.4
mm max.
Temperature resistance*** adhered to aluminium, -40°C to +80°C, no variation
Fire behaviour adhered to steel, self-extinguishing
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
16 N/25 mm
Tensile strength (DIN EN ISO 527)
along min. 19 MPa
across min. 19 MPa
Elongation at break (DIN EN ISO 527)
along min. 130%
across min. 150%
Shelf life** 2 years
Minimum application temperature > +10°C
Service life by specialist application
under vertical outdoor exposure (normal climate of
Central Europe)
4 years (not printed)
Attention:
After printing the ink must be thoroughly dry in order to avoid any affect on the later combination with the laminate.
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at
least three weeks and to completely cure respectively. The compatibility of selected lacquers and paints should be
tested by the user, prior to application of the material. Furthermore the application information published by ORAFOL
is to be considered.
Technical data
(without paper and adhesive)
(FINAT TM 14)
* average
Water resistance adhered to aluminium, after 48h/23°C no variation
** in original packaging, at 20°C and 50% relative humidity
Printing method
Inkjet printing with solvent based inks, UV- or Latex inks
Technical Data Sheet
*** normal climate of Central Europe
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of
information and is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications customers
should independently determine the suitability of this material for their specific purpose, prior to use.
ORAFOL Europe GmbH – Orafolstraße 2 – D 16515 Oranienburg
Telefon: +49 (0) 33 01/864 0 – Telefax: +49 (0) 33 01/864 100
E-Mail: [email protected] – Internet: http://www.orafol.de
Reviews
There are no reviews yet.