Orafol ORATAPE MT95 Application Tape
Transparent, polyethylene-based mounting film with a fine-pocketed finished for the transfer of die-cut and computer-cut
letters and symbols.
Modified polyacrylate, medium adhesive strength
Area of Use
The special composition of the polyacrylate adhesive enables unproblematic transfer of die-cut and computer cut letters and
symbols. Even after more than six months of application, without any considerable increase in adhesive strength, the tape
can be easily removed without leaving a residue. The high tensile strength of the tape ensures precise positioning. This film
is suitable for almost all well-known types of glossy or matte finished films.
Thickness* (film with adhesive) 6.0-mil
Weight* (paper and adhesive) 74#
Adhesive power (FINAT TM-1, after 20 min, stainless
Adhered to stainless steel: 0.45 lb/in
Tensile strength (DIN EN ISO 527) Along: Min. 25 MPa
Across: Min. 25MPa
Elongation at break (DIN EN ISO 527) Along: Min. 500%
Across: Min. 700%
Shelf life** 1 year
Application temperature > +50°F
Available widths (in inches)
14, 24, 30, 40, 48
*average **in original packaging, at 68°F and at 50% relative humidity
products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable
quality and free from manufacturing defects. Published information concerning ORATAPE ®
products is based upon research which the
Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORATAPE ®
products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the
product for each intended use, and the purchaser shall assume all risks regarding such use.
All specifications are subject to change without prior notice.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
ORATAPE® is a registered trademark of ORAFOL Europe GmbH.