Orafol ORATAPE MT72 Application Tape
Semi-transparent transfer paper with high dimension stability and high resistance to moisture. Used for the application of diecut or computer-cut letters and symbols
Natural rubber, medium adhesive strength
Area of Use
The special composition of the adhesive enables problem-free transfer of die-cut or computer cut letters and symbols using
both dry and wet bonding techniques. Due to its high dimensional stability, it is especially suitable for the transfer of large
letters and symbols with precise positioning. This mounting paper is suitable for almost all well-known types of glossy or
Thickness* (film with adhesive) 4.25-mil
Weight* (film and adhesive) 68#
Adhesive power (FINAT TM-1, after 20 min, stainless
Adhered to stainless steel: 0.91 lb/in
Tensile strength (dry) Along: Min. 0.36 MPa
Across: Min. 0.23 MPa
Tensile strength (wet) Along: 0.16 MPa
Elongation at break (DIN EN ISO 527) Along: 13.5%
Shelf life** 6 months
Application temperature > +50°F
Available widths (in inches)
14, 24, 30, 40, 48
*average **in original packaging, at 68°F and at 50% relative humidity
products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable
quality and free from manufacturing defects. Published information concerning ORATAPE ®
products is based upon research which the
Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORATAPE ®
products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the
product for each intended use, and the purchaser shall assume all risks regarding such use.
All specifications are subject to change without prior notice.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
ORATAPE® is a registered trademark of ORAFOL Europe GmbH.