Cart

ORAFOL ORAJET 3640 Transparent Matte PVC VINYL

$108.00$252.00

Select Size to see price.

Clear

Description

ORAFOL ORAJET 3640 Transparent Matte PVC VINYL
ORAJET®
3640
SOFT CALENDERED PVC DIGITAL MEDIA
Technical Datasheet
06/15
Page 1 of 2
ORAFOL Americas – GA
1100 Oracal Parkway
Black Creek, GA 31308
Phone: 888.672.2251
ORAFOL Americas – CT
120 Darling Drive
Avon, CT 06001
Phone: 800.654.7570
ORAFOL Canada
2831 Bristol Circle
Oakville, Ontario L6H 6X5
Phone: 888.727.3374
techsupport-americas@orafol.com – www.orafolamericas.com

Description
3-mil, soft calendered PVC film available in white and transparent with a gloss or matte surface.
Release Liner
83# silicone-coated paper
Adhesive
Clear, water-based, permanent adhesive
Area of Use
For economical short- to medium-term general signage and other flat indoor and outdoor applications including decals, name
plates, die-cut letters and POP
Technical Data
Thickness (without liner and adhesive) 3-mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.016”
Temperature Resistance Adhered to aluminum, -40°F to +176°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class “A”
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 3.7 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 19 MPa
Across: Min. 19 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 130%
Across: Min. 150%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces) 4 years (unprinted)
Minimum Application Temperature 50°F
Available Lengths
Available Widths
150’ (50-yard)
30”, 50”,54”, 60”, 80”
Recommended Laminates ORAGUARD®
Series 200, 210
Print Compatibility Latex, Solvent, Eco-Solvent, UV Curable
For best results, utilize ORAFOL ICC profiles available at www.orafolamericas.com and allow solvent-based inks to dry for at least 24 hours
(48-72 hours preferred) at 70°F before cutting the graphic to the ink or applying a laminate.
Note
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the
adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and
paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the
unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of
structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The
batch traceability according to ISO 9001 is possible on the basis of the roll number.
IMPORTANT NOTICE
All ORAJET®
products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable
quality and free from manufacturing defects. Published information concerning ORAJET®
products is based upon research which the
Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORAJET®
products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the
product for each intended use, and the purchaser shall assume all risks regarding such use.
All specifications are subject to change without prior notice.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm

Additional information

Adhesive Type

Brands

,

Color

,

Core-size

Surface Finish

Ink Type

, , ,

Media Type

,

Product Type

Size

, , , ,

Thickness

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations