Cart

ORAFOL ORAJET 3551DT Low Temperature PVC Digital Vinyl

$506.00

Select Size to see price.

Description

ORAFOL ORAJET 3551DT Low Temperature PVC Digital Vinyl
Description
2.75-mil, calendered PVC film in white with a gloss surface
Release Liner
88# PE-coated silicone paper
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
For general signage, indoor and outdoor cold-climate applications requiring a thinner, more conformable film
Technical Data
Thickness (without liner and adhesive) 2.75-mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.008” Temperature Resistance Adhered to aluminum, -58°F to +194°F, no variation Fire Behavior (DIN 75200) Fire Rating Adhered to steel, self-extinguishing ASTM E 84-07 Class “A” Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 4.1 lb/in Tensile Strength (DIN EN ISO 527) Along: Min. 19 MPa Across: Min. 19 MPa Elongation at Break (DIN EN ISO 527) Along: Min. 130% Across: Min. 150% Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation Shelf Life (68°F/50% relative humidity) 2 years Minimum Life Expectancy (based on accepted application procedures on vertical surfaces) 7 years (unprinted) Minimum Application Temperature 23°F Available Lengths Available Widths 75’ (25-yard) 54” Recommended Laminates ORAGUARD® Series 215, 290, 290GF, 293, 297GF Print Compatibility Latex, Solvent, Eco-Solvent, UV Curable For best results, utilize ORAFOL ICC profiles available at www.orafolamericas.com and allow solvent-based inks to dry for at least 24 hours (48-72 hours preferred) at 70°F before cutting the graphic to the ink or applying a laminate. Note Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number. IMPORTANT NOTICE All ORAJET® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORAJET® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORAJET® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Additional information

Adhesive Type

Brands

,

Color

Core-size

Surface Finish

Ink Type

, , ,

Media Type

,

Product Type

Size

Thickness

Reviews

There are no reviews yet.

Be the first to review “ORAFOL ORAJET 3551DT Low Temperature PVC Digital Vinyl”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations