ORAFOL ORAJET 3105HT High-Tack Calendered PVC Digital Media
High performance PVC film with excellent light-fastness and weather resistance in a white glossy finish.
Double sided PE coated paper, one side siliconised, 143 g/m²
Solvent polyacrylate, permanent, with high initial tack and final adhesion, grey
Area of use
For long-term graphic applications, markings and decorations in outdoor areas. Especially designed for applications on hardto-stick substrates such as low energy plastics (polyethylene, polypropylene) and rough or textured surfaces.
Inkjet printing with solvent based inks, UV- or latex inks.
Thickness* (without paper and adhesive) 100 micron
Dimensional stability (FINAT TM 14) Adhered to steel, no shrinkage in cross direction, in length
0,4 mm max.
Temperature resistance*** Adhered to aluminium, -50° C to +100° C, no variation
Sea water resistance (DIN 50021) Adhered to aluminium, after 100h/23° C no variation
Resistance to solvents and chemicals At room temperature, 72h after adhesion to aluminium, shortterm resistance to most oils and greases, fuels, aliphatic
solvents, weak acids, salts and alkalis
Fire behaviour Adhered to steel, self-extinguishing
Adhesive power* (FINAT TM 1, after 24h,
28 N/25 mm
Tensile strength (DIN EN ISO 527) Along: min. 19 MPa
Across: min. 19 MPa
Elongation at break (DIN EN ISO 527) Along: min. 130%
Across: min. 150%
Shelf life** 1 year
Application temperature > +4° C
Service life by specialist application
Under vertical outdoor exposure
(normal climate of Central Europe)
5 years (not printed)
* average ** in original packaging, at 20° C and 50% relative humidity *** normal climate of Central Europe
After printing, the ink must be allowed to thoroughly dry, in order to avoid any issues when later combined with the laminate.
Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least
three weeks and to completely cure. The compatibility of the selected lacquers and paints should be tested by the user, prior
to the application of the material. Furthermore the application information published by ORAFOL must be considered.
ORAJET® 3105HT Technical
Page 2 of 2
ORAFOL Europe GmbH – Orafolstraße 2 D 16515 Oranienburg – Germany
All ORAJET® products are subject to careful quality control throughout the manufacturing process and are warranted to be of
merchantable quality and free from manufacturing defects. Published information concerning ORAJET® products is based
upon research which the Company believes to be reliable although such information does not constitute a warranty. Because
of the variety of uses of ORAJET® products and the continuing development of new applications, the purchaser should
carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all
risks regarding such use. All specifications are subject to change without prior notice.
ORAJET® is a registered trademark of ORAFOL Europe GmbH.