Orafol ORAGUARD 280G Stone Guard 8 mil Polyurethane Film




Orafol ORAGUARD 280G Stone Guard Polyurethane Film

Orafol ORAGUARD 280G Stone Guard Polyurethane Film
8 mil Clear Gloss Laminate/Paint Protection Film.
• 7 year outdoor durability.
• Designed for longer protection for automotive paint on fenders, bumpers and deck, side skirts and other outdoor applications.
• Wet application is recommended when installing as a paint protection film, dry if used as a
• Great for flat to moderate curved surfaces.
• Can also be used as an overlaminate with Orajet 3105HT or 3951HT where more rugged protection is required.

Polyurethane film with outstanding UV resistance and excellent tear strength. Highly transparent gloss finished surface.

Release paper
Kraft paper, siliconized on one side, 137 g/m²
Solvent polyacrylate, permanent
Area of use
For the protection of sensitive surfaces against particularly strong mechanical forces in interior and exterior
applications. Especially designed for the application as a stone chipping protection film on vehicle body parts such as
fender, rear bumper deck or side skirt, etc. Recommended for bonding to even and slightly curved surfaces.

Technical Data

Thickness* (without protective paper and adhesive) 200 micron
Dimensional stability (FINAT TM 14) adhered to steel shrinkage 0.2 mm max.
Temperature resistance*** adhered to aluminium, -40°C to +100°C, no variation
Sea water resistance (DIN 50021) adhered to aluminium, after 100 h/23°C no variation
Resistance to solvents and chemicals at room temperature, 72h after adhesion to aluminium,
short-term resistant to most oils and greases, fuels,
aliphatic solvents, weak acids, salts and alkalis
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)

22 N/25 mm
Tensile strength (DIN EN ISO 527) along: min. 34 MPa
across: min. 34 MPa
Elongation at break (DIN EN ISO 527) along: min. 550%
across: min. 550%
Shelf life** 2 years
Application temperature > +10°C
Service life by specialist application
under vertical outdoor exposure
(normal climate of Central Europe)

7 years
* average ** in original packaging, at 20°C and 50% relative humidity *** normal climate of Central Europe
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be dried and cured
completely. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the
material. Furthermore the application information published by ORAFOL is to be considered. The batch traceability
according to ISO 9001 is possible on the basis of the roll number.

Additional information




Product Type

, ,



BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations