ORAFOL ORAGUARD 215 PVC Laminating Film Gloss
ORAGUARD® 215 PVC LAMINATING FILM
2.75, soft PVC film with a UV extension factor of three years. Available in gloss, semi-gloss or matte finish.
UL certified for UL 969 Marking and Labeling Systems (USA) and CSA C22.2 No. 0.15 Adhesive Labels (Canada).
55# silicone-coated paper
Clear, solvent-based, permanent adhesive
Area of Use
A cold laminate for protection of medium- to long-term indoor and outdoor digital print applications. Flat application ONLY.
Thickness (without liner and adhesive) 2.75-mil
Temperature Resistance Adhered to aluminum, -58°F to +194°F, no variation
Fire Behavior (DIN 75200)
Adhered to steel, self-extinguishing
ASTM E 84-07 Class A
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.74 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 19 MPa
Across: Min. 19 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 130%
Across: Min. 150%
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces) 5 years
Minimum Application Temperature 46°F
30, 36, 40, 50, 54, 60
Recommended to be used in combination with ORAJET®
Series 3850, 3691, 3651, 3651RA, 3551,
3551RA, 3551DT, 3169RA, 3165, 3165RA, 3109, 3105HT
UV Protection Extension Factor +3 years
For best results, utilize ORAFOL ICC profiles available at www.orafolamericas.com and allow solvent-based inks to dry for at least 24 hours
(48-72 hours preferred) at 70°F before cutting the graphic to the ink or applying a laminate.