ORAFOL ORACAL 383 Ultraleaf Cast Vinyl Gloss Gold

Description

ORAFOL ORACAL 383 Ultraleaf Cast Vinyl Gloss Gold
ORACAL® 383 ULTRALEAF CAST FILM
Description
3.5-mil, ultraleaf cast PVC film with a three-dimensional textured surface and excellent dimensional stability.
Available in chrome and gold with a gloss finish.
Release Liner
83# silicone-coated paper
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for lettering, marking and decoration of vehicles, windows and signs requiring long-term outdoor durability.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive) 3.5-mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.009”
Temperature Resistance Adhered to aluminum, -65°F to +160°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class “A”
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 3.7 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 17 MPa
Across: Min. 17 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 35%
Across: Min. 35%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces) 5 years
Minimum Application Temperature 50°F (dry application)
Available Lengths
Available Widths
150’ (50-yard) and 30’ (10-yard)
15” (punched), 24”, 30”, 48”
Recommended Application Tapes ORATAPE®
Series HT55, MT95, MT72
Print Compatibility Thermal transfer
Note
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the
adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and
paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the
unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of
structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The
batch traceability according to ISO 9001 is possible on the basis of the roll number.
IMPORTANT NOTICE
All ORACAL®
products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable
quality and free from manufacturing defects. Published information concerning ORACAL®
products is based upon research which the
Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORACAL®
products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the