ORACAL 751 Colors
ORACAL 751 Colors
High Gloss High Performance Vinyl.
• 2 mil cast vinyl.
• Ultra glossy – highest gloss available.
• Up to 8 year outdoor durability.
• Thermal printable.
• Not edge stripped.
• Permanent solvent-based adhesive.
• Blue liner on white vinyl for easier weeding.
• Most opaque high performance film available.
• Cuts and weeds great for increased production.
• High gloss works great in thermal printers.
• Excellent conformability even over rivets.
• Better dimensional stability, further ensuring that no shrinking, stretching or movement occurs after final bonding.
2-mil, high performance PVC film with excellent dimensional stability and very good cutting and application characteristics.
Available in 78 vivid colors plus transparent, matte white and matte black.
84# custom silicone coated paper with special release characteristics that provide excellent weeding and release values.
Customized blue silicone paper liner for matte and gloss white provides superior contrast for weeding.
Clear, solvent-based, permanent adhesive
Ideal for lettering, marking and decoration with high requirements for durability and conformability. Particularly suitable for high
quality vehicle and fleet graphics.
Thickness (without liner and adhesive) 2 mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.006”
Temperature Resistance Adhered to aluminum, -58°F to +230°F, no variation
Fire Behavior (DIN 75200)
Adhered to steel, self-extinguishing
ASTM E 84-07 Class “A”
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 4.1 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 19 MPa
Across: Min. 19 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 120%
Across: Min. 120%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces)
8 years – black and white / 7 years – colors/transparent
5 years – metallic / 4 years – brilliant blue and gold
Minimum Application Temperature 46°F
Available Widths (inches)
150’ (50-yard) and 30’ (10-yard)
15 (punched), 24, 30, 36 (transparent, black and white
only), 40 (transparent and white only), 48
Recommended Application Tapes ORATAPE® HT55, MT95, MT72
Print Compatibility Thermal transfer (gloss finish only)
Recycling Recommendation: Waste class similar to household waste, is to be recycled according to the local regulations.
Surfaces to which the material will be applied must be cleaned thoroughly of dust, grease or any contaminants. Freshly lacquered or painted
surfaces should be allowed to stand for at least three weeks after complete curing. The compatibility of selected lacquers and paints should be
tested by the end-user prior to use.
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of
information and is given without any guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications,
customers should independently determine the suitability of this material for their specific purpose, prior to use.