Brilliant Metallized Polyester Mirror Film Metallized polyester mirror film with outdoor durability: 2 years chrome, 1 year gold. All styles 1 mil thick unless otherwise noted
Transparent, white or metallized polyester film with excellent dimensional stability and good long- term ageing
properties. Surface with top-coat for printing.
PE-coated release paper on both sides, 160 g/m².
Solvent polyacrylate, permanent
Area of use
For first class decorative labels, name and technical plates, decoration and moldings, safety stickers.
Screen printing and UV-offset printing are recommended.
Thickness* 23 micron (transparent, chrome, matt chrome, gloss gold,
gloss gold on both sides)
50 micron (white, chrome, brushed silver, gloss gold on both
Dimensional stability adhered to steel, no measurable shrinkage in cross direction, in
length 0.10 mm max.
Temperature resistance adhered to aluminium, -40°C to +120°C, no variation
Seawater resistance adhered to aluminium, after 100h/23°C no variation
(FINAT TM 1, after 24h, stainless steel)
12 N/25 mm
Tensile strength (DIN EN ISO 527)
along min. 200 MPa
across min. 260 MPa
Elongation at break (DIN EN ISO 527)
along min. 125%
across min. 80%
Shelf life** 2 years
Application temperature > +8°C
Service life by specialist application
under vertical outdoor exposure (normal climate of Central Europe)
2 years, glossy gold 1 year (not printed)
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at
least three weeks and to completely cure respectively. The compatibility of selected lacquers and paints should be
tested by the user, prior to application of the material. Furthermore the application information published by ORAFOL
is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number