Mojave SPMBF 2.3 mil. Barrier Film
Face Film 2.3 ± 0.2 mil high gloss top coated white
polypropylene film with a metallized layer for opacity.
Adhesive P84 white acrylic pressure activated permanent
Gloss Level High
Outdoor Durability Up to 12 months
This product is intended for use in creating an opaque two-way decal
by laminating to Hi-Stat® clear static cling or Clear-Ad® clear pressure
sensitive film for interior and exterior viewing. This avoids having to print
many layers of ink on one film, which can cause the material to become
extremely brittle if printing with UV inks.
The steps are: reverse print on clear static cling or clear film, laminate
this barrier film to the clear printed film and then print on the barrier film
to create a two-way decal.
UV PRINTABLE ONLY.
Total Product Thickness 9.5 ± 0.5 mils
Minimum Application Temperature +40º F
Service Temperature Range -20° F to +275° F
Expected Outdoor Life Two years mid-continental US, vertical exposure
Adhesion 40 ± 2oz/in.
(180º adhesion from SS, 20 minute room temperature dwell)
Water Resistance Good: test piece aged 24 hrs. applied to stainless steel is not affected
when immersed in 70ºF water for seven days
Solvent Resistance Good for most petroleum based solvents. Edge sealing is recommended
in high solvent exposure areas
Shelf Life One year when stored under conditions of 70°F and 50% relative
2.3 mil. Barrier Film
Top coated white polypropylene, metallized back with a permanent white adhesive on a 40# liner. Ideally used for two-way window decals with CGFS Clear-Ad or Hi-Stat. UV PRINTABLE ONLY.