Mojave LM4CL 4.0 mil. Gloss Clear Flexible Vinyl – With UV Protection overlaminates

Description

Mojave LM4CL 4.0 mil. Gloss Clear Flexible Vinyl – With UV Protection overlaminates
Catalina Graphic Films’ Mojave Digital Media family of Overlaminates enhance overall graphic depth and gloss while protecting printed materials from UV radiation, environmental elements and general abuse.
APPLICATION:
This product is intended for use as an overlaminating film as a glare reducing protective layer for printed substrates that are applied to outdoor surfaces, such as bus or automobile markings, buildings; signage; etc.
FACE FILM:
4.0 ± 0.2 mils clear, flexible vinyl
ADHESIVE:
1.0 ± 0.1 mils P-22, clear, acrylic, pressure-activated, high-performance permanent
LINER:
2-mil clear, silicone-coated-one-side, clear film
OPACITY:
Clear
GLOSS LEVEL:
Gloss
OUTDOOR DURABILITY:
Up to 5 Years unprinted
PRODUCT THICKNESS (FILM ONLY):
4.0 – 4.2 mils
MINIMUM SURFACE/AMBIENT AIR APPLICATION TEMPERATURE:
+35° F.
SERVICE TEMPERATURE RANGE:
-20° F to +150° F.
WATER RESISTANCE:
Good.
SOLVENT RESISTANCE:
Good for most petroleum solvents and lower aliphatic alcohols. For ultimate solvent resistance, edge sealing is recommended.
ADHESION:
40+ oz. per lineal inch width (180 peel from Stainless Steel; 15-minute, room temperature dwell on test panel).
UV RESISTANCE:
Up to 5 Years unprinted
SHELF LIFE:
One (1) year when stored under conditions of 70°F and 50% relative humidity.
SIZES:
PRODUCT CODE
SIZE
LM4CL3050A 30” X 50 YDS
LM4CL5450A 54” X 50 YDS
LM4CL6050A 60” X 50 YDS
4.0 mil. Gloss Clear Flexible Vinyl – With UV Protection WITH A PERMANENT ACRYLIC ADHESIVE ON A 2.0 MIL CLEAR FILM LINER
LM4CL5450A LM4CL6050A