Mojave LM3CL 3.0 mil. Gloss Clear Flexible Vinyl – With UV Protection overlaminates
Catalina Graphic Films Mojave Digital Media family of Overlaminates enhance overall graphic depth and gloss
while protecting printed materials from UV radiation, environmental elements and general abuse.
Fleet without Rivets
Face Film 3.0 ± 0.2 mils clear, flexible vinyl
Adhesive 1.0 ± 0.1 mils P-22, clear, acrylic, pressureactivated,
Liner 53-lb. (3.1 ± 0.2 mils) white, polyethylenecoated-one-side,
Gloss Level Gloss
Outdoor Durability Up to 5 Years Unprinted
This product is intended for use as an overlaminating film with high
gloss properties for printed substrates that are applied to indoor and
outdoor surfaces. Flat and simple curves only.
Product Thickness (Film Only) 3.0 – 3.2 mils
Minimum Surface/Ambient Air
Application Temperature +35° F.
Service Temperature Range -20° F to +150° F.
Water Resistance Good.
Solvent Resistance Good for most petroleum solvents and lower aliphatic alcohols.
For ultimate solvent resistance, edge sealing is recommended.
Adhesion 40+ oz. per lineal inch width (180 peel from Stainless Steel;
15-minute, room temperature dwell on test panel).
UV Resistance Up to 5 Years Unprinted
Shelf Life One (1) year when stored under conditions of 70°F and 50%
3.0 mil. Gloss Clear Flexible Vinyl with UV Protection
With a Permanent Acrylic Adhesive on 53# Paper Liner.
LM3CL3050A LM3CL5450A LM3CL6050A