Mojave LM2CL 2.0 mil. Clear Polyester
Catalina Graphic Films Mojave Digital Media family of Overlaminates enhance overall graphic depth and gloss
while protecting printed materials from UV radiation, environmental elements and general abuse.
Face Film 2.0 ± 0.2 mils clear, polyester
Adhesive 1.0 ± 0.1 mils P-22, clear, acrylic, pressureactivated,
Liner 2-mil clear, silicone-coated-one-side clear film
Gloss Level Gloss
Outdoor Durability Indoor Only
This product is intended for use as an overlaminating film as a
protective layer for printed substrates that are applied to indoor
Product Thickness (Film Only) 2.0 – 2.2 mils
Minimum Surface/Ambient Air
Application Temperature +35° F.
Service Temperature Range -20° F to +150° F.
Water Resistance Good.
Solvent Resistance Good for most petroleum solvents and lower aliphatic alcohols.
For ultimate solvent resistance, edge sealing is recommended.
Adhesion 40+ oz. per lineal inch width (180 peel from Stainless Steel;
15-minute, room temperature dwell on test panel).
Shelf Life One (1) year when stored under conditions of 70°F and 50%
2.0 mil. Clear Polyester WITH A PERMANENT ACRYLIC ADHESIVE ON A CLEAR FILM LINER