Mojave CMTT100SLPR1.0 mil. Clear Polyester mounting film
Catalina Graphic Films Mojave Mounting Films converts non-pressure sensitive filmssuch as membrane
switches, posters, mouse-pads, decals and medical applicationsinto pressure sensitive materials.
Face Film 1.0 mil. Clear Polyester
Adhesive P82 clear acrylic pressure activated permanent
R32 clear acrylic pressure sensitive removable
Liner 40# (3.0 ± 0.2mils) white super calendered
paper coated-silicone coated on both sides
Indoor Durability Up to 3 Years
Application These products are intended for mounting substrates and signage
such as styrene, rigid vinyl, polyester, acrylic and polycarbonates.
Total Product Thickness 6.0 ±0.2 mils
Minimum Application Temperature +40º F
Service Temperature Range -20° F to +150° F
Excellent: test piece (with vinyl face film applied) ages 24 hrs. applied
to stainless steel is not affected when immersed in 70ºF water for
Good for most petroleum based solvents. Ultimate resistance to
solvents is highly dependent on the face film or substrate used. Edge
sealing is recommended in high solvent exposure areas
Shelf Life One year when stored at 70°F and 50% relative humidity.
1.0 mil. Clear Polyester With a permanent acrylic adhesive on one side and removable acrylic adhesive on the other, and a 40# C2S release liner
CMTT100SLPR CMTT100SLPR3850 CMTT100SLPR5150 CMTT100SLPR5450