Mojave CMTT100SL 1.O mil. Clear Polyester With a permanent acrylic adhesive mounting film
Catalina Graphic Films Mojave Mounting Films converts non-pressure sensitive filmssuch as membrane
switches, posters, mouse-pads, decals and medical applicationsinto pressure sensitive materials.
Face Film 1.0 mil. Clear Polyester
Adhesive Permanent / Permanent Acrylic
P82 clear acrylic pressure activated permanent
90# (6.5 ± 0.2mils) white polyethylene coated
two side-silicone coated one side paper (first
40# (3.0 ± 0.2 mils) white silicone coated on
one side paper (second release liner)
Indoor Durability Up to 3 Years
Application These products are intended for mounting substrates and signage
such as styrene, rigid vinyl, polyester, acrylic and polycarbonates.
Total Product Thickness 12.5 ±0.2 mils
Minimum Application Temperature +40º F
Service Temperature Range -20° F to +150° F
Excellent: test piece (with vinyl face film applied) ages 24 hrs. applied
to stainless steel is not affected when immersed in 70ºF water for
Good for most petroleum based solvents. Ultimate resistance to
solvents is highly dependent on the face film or substrate used. Edge
sealing is recommended in high solvent exposure areas
Shelf Life One year when stored at 70°F and 50% relative humidity.
1.O mil. Clear Polyester With a permanent acrylic adhesive on both sides and a 40# C2S release liner
CMTT100SL CMTT100SL3850 CMTT100SL5150 CMTT100SL5450