Mactac MACmark TuningFilms Carbon Fiber Silver


Select Size to see price.



MACmark TuningFilms Carbon Fiber Silver TFL1068BF
Tuning Film Carbon BF Vehicle Wrapping Film
Product Description
This is a MACtac family of embossed colored vinyl films designed for vehicle wrapping. The
Carbon Fiber faces are 5.1 mil cadmium-free polymeric vinyl, available in four gloss colors.
Carbon Fiber films are coated with a high performance, low tack and micro-structured (bubblefree), permanent, solvent acrylic adhesive for easy application. The adhesive is protected by
an 80# micro-embossed, polycoated release liner for added stability and layflat with a light grey
‘MACtac’ back printing
The Tuning Film Matte white and Matte black faces are 3.9-mil cadmium-free polymeric vinyl
films coated with high performance, repositionable, clear acrylic adhesive. This product utilizes
an 83# white kraft liner for stability and layflat with blue ‘MACtac’ backprinting.
Finish Stock Number
Carbon Fiber Black TFL1088BF
Carbon Fiber White TFL1028BF
Carbon Fiber Silver TFL1068BF
Carbon Fiber Graphite TFL8801BF
Tuning Matte Black TF0088
Tuning Matte White TF0028
These films are outstanding choices for adding unique looks to a number of different surfaces
such as internal or external vehicle parts, above-the-water boat hull wrapping, furniture
finishing and electronic equipment wraps like on cell phones, computer covers, etc.
Physical Properties
Property Typical Values Test Method
Thickness, inches (mm)
Face plus adhesive
Carbon Fiber Matte
0.0061 (0.130) 0.0047 (0.12)
ASTM D-645
(ISO 543)
Face Material Data, 68?F (20?C)
Tensile strength lb./in. (N/15mm)
Elongation % at break
> 12 (40) >9.8 (27)
> 150% >150%
DIN 53455-5
Peel Adhesion lb./in. (N/25 mm)
180? on Stainless Steel
-20 min. 2.8 (13) 4.6 (20)
ASTM D-903
– 24 hr.
– 1 week
3.4 (15) 6.8 (30)
3.7 (16) 8.0 (35)
Dimensional Stability, %
48 hours @ 158°F < 0.3 < 0.3 FTM- 14 10” x10” Sample Bonded to aluminum Temperature Range Application: End Use: 50? to 104?F (10? to 40?C) -40? to 194?F (-40? to 90?C) Flammability Self-extinguishing ISO 3795 ? Values given are typical for unprocessed product and are not for use as specifications. Processing may change the values. Durability Vertical exposure (Horizontal exposure: reduced by 50%): Vertical application (years) Horizontal application (years) Zone 1 Zone 2 Zone 3 Zone 1 Zone 2 Zone 3 TF black matt 10 7.5 5 6 4.5 Not Recommended TF white mat 10 7.5 5 6 4.5 Not Recommended TF Carbon Fiber black BF 5 4 2.5 3 2 Not Recommended TF Carbon Fiber white BF 5 4 2.5 3 2 Not Recommended TF Carbon Fiber Graphite BF 4 3 2 2 1.5 Not Recommended TF Carbon Fiber Silver BF 4 3 2 2 1.5 Not Recommended TF Carbon Fiber Gold BF 4 3 2 2 1.5 Not Recommended Zone 1: North America, North, West, Central & Eastern Europe (Excluding desert areas of the USA which are in zone 3) Zone 2: Central & South America, South Europe, Asia Pacific, Australia South coastal (Perth to Brisbane), New Zealand Zone 3: Greater Middle East, Africa, Australia, USA (Arizona, California, Florida, Nevada, New Mexico, Texas, Utah), and Mexico. Shelf Life Tuning Films have a two year shelf life when stored between at 60- 80?F (15 - 25?C) and 50% relative humidity or less. Removability Tuning Films remove cleanly with heat. Chemical Resistance This product is resistant to most oils and grease, fuels, aliphatic solvents, weak acids, salts and Alkalis. Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version Recommendations On flat or slightly curved surfaces: Apply directly on the substrate by the dry application method. 1) On convex areas: Heat the film with a heat gun before stretching it over the convex area. 2) On corrugated or concave areas: If the film is stretched into a corrugation it may pop-out after a few weeks. It is, therefore, recommended to cut the film and to apply it in the corrugation without tension. 3) On rivets: Apply the film over the rivet with high pressure and heat it with a heat gun (temperature over 500°C). The film may lift slightly after few weeks. 4) Marine applications: We strongly recommend edge sealing. Adhesive CategoryBubble Free Adhesive TypePermanent Acrylic Brand NameMACmark ColorGray FilmsVinyl (PVC) FinishTexture Length82' Liner Category80# Polycoated Kraft Outdoor Durability5 Years Precise ProgramN Secondary ColorCarbon Fiber Graphite Stock TypeVinyl Thickness5.1 mil Width60"