Cart

Mactac ColorGard CG8300 Luster

$259.00

Description

Mactac ColorGard CG8300 Luster

Mactac ColorGard CG8300 Luster
3 Mil Vinyl Overlaminate.
• Intermediate, coated, clear overlaminating film offering UV resistance.
• Uniform matte surface protects printed graphics from abrasion, moisture, and other damaging effects.
• Clear PET liner.
• Great adhesion to UV inks.
• Durability 3 years outdoors and 5+ years indoors.

Size: 54” x 150 ft


http://mactac.com/fileadmin/user_upload/Graphic/Performance_Guides/CG8300.pdf

PRODUCT: CG8300 Lustre

PERMACOLOR®

The Permacolor system is a series of pressure sensitive products for mounting and
overlaminating in the imaging industries. Pressure sensitive Permacolor provides fast, efficient
processing through cold roll lamination techniques without the need for heat, drying or messy
coating operations.

PRODUCT DESCRIPTION
The ColorGard®
overlaminating films are a family of intermediate pressure sensitive adhesive
coated, clear overlaminating films that are available in a variety of surface finishes. These films
can be laminated to photographic prints, transparencies and digital images including UV inkjet,
solvent- and eco-solvent inkjet, and water-based inkjet prints to impart protection from abrasion,
moisture and other potentially damaging effects in both indoor and outdoor environments.

CG8300 Lustre is a vinyl film coated on one side with a clear acrylic pressure sensitive
adhesive. An easily removed ultra-smooth, 46#CCK liner protects the adhesive. CG 8300
provides a uniform, lustre surface that protects from abrasion, moisture and other potentially
damaging effects. It also helps retard color fade caused by ultra violet (UV) light exposure.

TYPICAL VALUES*
PHYSICAL PROPERTIES TEST METHOD
Thickness, inches (µm) ASTM D645
Film plus adhesive 0.0043 (109)
Total product 0.0060 (152)

Quick Tack, lb./in.2 (N/25 mm) MACtac CTM-25
Stainless Steel 3.0 (13.2)
UV Inkjet Print 1.2 (5.3)

Peel Adhesion, lb./inch (N/25 mm) PSTC – 1
Stainless Steel – 30 minutes 3.5 (15.3)
-24 hours 4.2 (18.4)
UV Inkjet Print – 30 minutes
-24 hours

Dimensional Stability (Shrinkage), inches (mm) MACtac CTM-21
48 hours @ 158°F (70°C) bonded to aluminum (Method D)
MD 0.02 (0.5)
CD 0.02 (0.5)

Shear, Hours to Fail PSTC – 7
Stainless Steel – 1000g @ 72°F (22°C) 150

White Light Transmission, % 90 MACtac CTM – 67
(Note: Glass = 100)
IMPORTANT NOTICE: The information given and the recommendations made herein are based on our research and are believed to be accurate, but no
guarantee of their accuracy or completeness is made. In every case, user shall determine before using any product in full scale production, or in any way,
whether such product is suitable for user’s intended use for their particular purpose under their own operating conditions. User assumes all risk and liability
whatsoever in connection with their use of any product. The products discussed herein are sold without any warranty as to merchantability or fitness for a
particular purpose, or any other warranty, express or implied. No representative of ours has any authority to waive or change the foregoing provisions, and
no statement or recommendation not contained herein shall have any force of effect unless in an agreement signed by the officers of seller and
manufacturer. Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or
recommendation to practice any invention covered by any patent without authority from the owner of the patent. The following is made in lieu of all
warranties, express or implied: Seller’s and manufacturers’ only obligation shall be to replace or credit such quantity of the product proved to be defective
at its discretion.

TM Trademark of Morgan Adhesives Company.
® Registered Trademark of Morgan Adhesives Company.
www.MACtac.com

PHYSICAL PROPERTIES TYPICAL VALUES* TEST METHOD
Gloss (60° angle) 25 ASTM D-523

Temperature Range Guidelines
Application: Above 45°F (7°C) for best results.
End Use: -40° to 150°F (-40° to 66°C)

Adhesive pH Neutral TAPPI -529

DURABILITY:
The durability of the film is 3-4 years in vertical (90±5°) applications outdoors and 5+ years
indoors. While all Permacolor overlaminating films have UV resistance built in to help extend
the life of your image, the durability of the image is mainly dependent upon the quality of the
inks (see technical data sheets given by the ink manufacturers) and pressure sensitive media being
used.

GENERAL COMMENTS
⇒ Where exposure to moisture, chemicals, solvents or high pressure wash is anticipated,
MACtac recommends sealing the edges with varnish, silicone or other sealant to prevent
penetration by these liquids.
⇒ Overlaminates should not be applied onto dusty or dirty prints.
⇒ The mounting board must be properly prepared prior to mounting the image. This may
include wiping with alcohol, light sanding or surface sealing depending on the board.
Contact your board supplier for their recommendation.
⇒ MACtac’s pressure sensitive mounting films are intended for “Cold Roll Lamination”
(40°F – 104°F). The addition of heat while simultaneous mounting with Thermal
Overlaminates may result in curl or have other detrimental effects on the finished
product.
⇒ Whenever possible, always test first to ensure end-use capability.

1) The user is responsible for determining the product’s suitability, including adhesion and if
needed, removal characteristics when used in applications other than listed specifically in
this Performance Guide.

2) If there are any questions about applications, please contact your MACtac sales
representative to discuss your requirements for recommendations.

3) If this is a printed Performance Guide it is an uncontrolled document. Please check the
MACtac website for the latest, most up-to-date version.

SHELF LIFE
Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: MACtac
recommends that rolls be stored on end or suspended from the core.

* Values given are typical and are not necessarily for use in specification.
CALL 1-800-401-5005 for additional product information

Additional information

Size

Brands

Product Type

Color

Thickness

Surface Finish

BCI Offers FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations