Cart

Mactac 9800PRO High-Performance Calendered Vinyl Light Green

$101.75$171,875.00

Select Size to see price.

Description

Mactac 9800PRO High-Performance Calendered Vinyl Light Green
MACal 9800Pro & Pro SL
High Performance Vinyl Series
Product Description
Exclusive Mactac films designed for high performance permanent marking applications. The face is a
2.6-mil cadmium-free vinyl, which are durable yet highly flexible for conformability over difficult
surfaces and has an enhanced high gloss finish. The product is coated with a high performance,
permanent, clear acrylic adhesive for 9800Pro and a durable white acrylic adhesive for 9800ProSL.
These products utilize an 83# white kraft liner for stability and layflat with blue backprinting. The
products exhibit excellent dimensional stability and are designed for superior cutting and weed ability.
Mactac offers a wide variety of standard high gloss colors with MACal? 9800Pro, and ultra-bright,
luminous colors with MACal? 9800ProSL.
Typical Applications
• Fleet marking
• Container decals
Physical Properties
Property Typical Values Test Method
Thickness in inches
Film plus adhesive 9800Pro
Film plus adhesive 9800SL
0.0037 (0.095)
0.0039 (0.10)
ASTM D-645
Peel Adhesion
180° on Stainless Steel
– 20 min.
– 24 hr.
– 1 week
4.0 (16)
4.1 (18)
4.6 (20)
ASTM D-903
Face Material Data, 68°F
(20°C)
Tensile strength lb./in.
(N/15mm)
Elongation % at break
>9.8 (27)
>150%
DIN 53455
Dimensional Stability
(shrinkage) in Percent
48 hours @ 158°F
< 0.10 <0.4% - 9800SL FTM- 14 10” x10” Sample (70 ° C) Bonded to Aluminum Temperature Ranges Application: End Use: 45° to 104°F (8° to 40°C) -40° to 194°F (-40° to 90°C) Flammability Self-extinguishing ISO 3795 • Equipment identification • Window graphics and signs Durability The durability of these products is; White and black - 8 years outdoor, all other colors - 7 years and metallic’s - 5 years outdoors. This use-life estimate is based upon accelerated age studies based on vertical applications under “normal” temperate climates. Printability Printability is not warranted. However, we have created the following guidelines if printing is desired: 1) For screen printing: Limit the screen ink to two or three colors. While the liner is an excellent liner, it is designed for plotter cutting. Sometimes too much heat may result in the liner ‘waving’ a little which can cause registration issues when additional colors are used. Mactac recommends Nazdar 3500 series UV cured screen inks. 2) If printing UV inkjet; make sure the vacuum (if flatbed) is strong enough to hold the liner down tight. Typically it is, but vacuums are notoriously weak, especially as they age. 3) If printing with solvent inks; limit the inks to a total of 270% saturation. Use a generic ICC profile for either 2 mil cast of 3.5 mil calendared vinyl films as a starting point. 4) Thermal transfer printing: all MACmark gloss films are thermal transfer printable. We strongly recommend the use of a web cleaner prior to printing due to the potential presence of paper dust from the white kraft paper liner. Shelf Life Two years when stored between at 60- 80°F (15 - 25°C) and 50% relative humidity or less. Chemical Resistance A sample is prepared by adhering the film to a metal substrate 24 hours prior to immersion in the chemical solution or solvent. After a fixed period of time, the sample is removed, dried and examined for adhesion. Chemical Time Immersed Observation Water 24 hours Excellent 5% Detergent 24 hours Excellent 10% Hydrochloric Acid 24 hours Excellent 10% Sulfuric Acid 24 hours Excellent 10% Phosphoric acid 24 hours Good/Excellent 10% Sodium Hydroxide 24 hours Excellent 10% Ammonium Hydroxide 24 hours Excellent Ethylene Glycol 24 hours Excellent Methanol 1 hour Good SAE 10W30 Oil 24 hours Excellent Gasoline Resistance A sample is prepared in the same manner as for the Chemical Resistance Test and is sprayed several times with gasoline followed by drying at each stage. Test Fuel Observation Low Octane Good High Octane Good Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version. Application Tips Application of MACal 9800Pro and Pro SL is made easier if Mactac pre-spacing tape is used. Where exposure to chemical and solvent spills is likely to occur, edge sealing of decals with a varnish or clear coat will prevent edge lift. Correct varnishing of decals gives greater protection and longer end-use life against any prolonged effect of weathering, abrasion and other erosive effects such as frequent cleaning.