Kapco Water-Proof 8 mil Matte Paper 60″ X 60′
Matte finish look at an economical cost. Water-Proof. Can be printed with dye or pigmented inks
Water-Proof 8 mil Matte Paper
for Water-Based Inkjet Printers
Product Number: KJWPPAPER
Material: Matte Paper
Caliper/Gauge: 8 mil
Weight: 140 g/m2 (36 lb)
Gloss Level: 2.6 (avg) @ 60°
Ink saturation level of this product is 200% and heavy coated paper setting on most RIPs is appropriate. Pigmented based inks enhance both water and ultraviolet resistance levels. Dye based
inks, while maintaining excellent vibrancy, show a slightly lower ultraviolet resistance. Over saturation with dye based inks may result in image degradation. Product can be printed on Encad/Kodak (pigmented inks only), Hewlett-Packard DesignJet (2xxx/3xxx/5xxx), ColorSpan Displaymaker
(pigmented inks only), Epson Stylus Pro (7xxx/9xxx), Mimaki JV4 (pigmented inks only) and Roland
Hi-Fi Jet (pigmented inks only).
Ink Dry Time: Varies with type and amount of ink, relative humidity
Printing: 60-80° F, 50% Relative Humidity
Ideal Storage Conditions: 70° F (21° C), 50% Relative Humidity, store in original
Handling Requirements: Due to absorptive nature of the coating, avoid
touching the coated surface with bare skin. Always
wear cotton gloves when handling inkjet-coated
materials. Rolls are supplied withthe coated surface
wound out. When rolling graphics, always roll so that the
thinner material is on the outside surface of roll.
Life Expectancy: Outdoor – up to 3 months without lamination with
Shelf Life: 1 year from ship date when stored in proper conditions.
Finishing/Lamination Can be laminated with either pressure sensitive or low
temperature thermal laminate. Before lamination,
please allow image to dry for 24 hours.