Kapco Water-Proof 14 mil Blackout Scrim Banner

Description

Kapco Water-Proof 14 mil Blackout Scrim Banner

True blockout scrim banner for outdoor graphics. Printed side does not show through. For best results use pigmented inks.

Water-Proof 14oz. Blackout Scrim Banner
for Water-Based Inkjet Printers
Properties:
Product Number: KJWPB1002
Material: Blackout Scrim Banner
Caliper/Gauge: 15.4 mil
Whiteness: 108
Brightness: 95
Gloss (60°): 2.6 (avg)
Printer/Ink Compatibility:
Ink saturation level of this product is 250% and heavy coated paper setting in most RIPs is appropriate. Inkjet coating is designed for use primarily with dye based inks. Although pigmented inks
may be used, a slight color gamut difference may be observed. Product can be printed on Encad/Kodak (dye inks only), Hewlett-Packard DesignJet (2xxx/3xxx/5xxx), ColorSpan Displaymaker
(dye inks only), Epson Stylus Pro (7xxx/9xxx), Mimaki JV4 (pigmented inks only) and Roland
Hi-Fi Jet (pigmented inks only)
Ink Dry Time: Varies with type and amount of ink, relative humidity
and temperature.
Enviornment:
Printing: 60-80° F, 50% Relative Humidity
Ideal Storage Conditions: 70° F (21° C), 50% Relative Humidity, store in original
packaging.
Handling Requirements: Due to absorptive nature of the coating, avoid
touching the coated surface with bare skin. Always
wear cotton gloves when handling inkjet-coated
materials. Rolls are supplied withthe coated surface
wound out. When rolling graphics, always roll so that the
thinner material is on the outside surface of roll.
Life Expectancy: Outdoor – up to 6 months without lamination.
Shelf Life: 6 months from ship date when stored in proper
conditions.
Finishing/Lamination: A pressure sensitive vinyl laminate is recommended, to
give surface protection from dirt and abrasion. Thermal
laminates should not be used. Before lamination, please
allow image to dry for 24 hours.