Kapco Adhesive Backed Microporous Gloss Polypropylene Film




Kapco Adhesive Backed Microporous Gloss Polypropylene Film

Bright white, water resistant, recyclable polypropylene film. Microporous coating for instant drying.

Adhesive Backed Micro Porous Gloss
Polypropylene Film for Water-Based Inkjet Printers
• Bright white, water resistant, recyclable polypropylene film
• Micro porous coating for instant drying
Product Number: KJABMPGPP
Caliper/Gauge: 7.5 mil (6.5 mil Film & 1 mil Adhesive)
Material: White Polypropylene Film
Adhesive: Clear Permanent Acrylic
Opacity: >90%
Whiteness: >85
Gloss Level: >40 (avg) @ 60°
Printer/Ink Compatibility:
Hewlett-Packard, Canon,and Epson dye & pigment-based inks. Saturation level of this product is
300% and glossy film/photo paper setting in most RIPs is appropiate.
Ink Dry Time: Varies with type and amount of ink, relative humidity
and temperature.
Printing: 60-80° F, 50% Relative Humidity
Ideal Storage Conditions: 70° F (21° C), 50% Relative Humidity, store in original
Handling Requirements: Due to absorptive nature of the coating, avoid
touching the coated surface with bare skin. Always
wear cotton gloves when handling inkjet-coated
materials. Rolls are supplied withthe coated surface
wound out. When rolling graphics, always roll so that the
thinner material is on the outside surface of roll.
Life Expectancy: Outdoor – up to 1 year without lamination with
pigmented inks
Shelf Life: 1 year from ship date when stored in proper conditions.

Finishing/Lamination Always use pressure sensitive laminates. Before applying
laminate, allow image to dry for 24 hours.

Additional information


, ,

Ink Type

Product Type

Media Type

, , , ,


Surface Finish





There are no reviews yet.

Be the first to review “Kapco Adhesive Backed Microporous Gloss Polypropylene Film”

Your email address will not be published.

Free Shipping Same Day oversized items excluded, Rush shipping availableDistribution Locations