Kapco 4 mil Clear Polyester (Transparency) Film




Kapco 4 mil Clear Polyester (Transparency) Film

Clear polyester for transparencies, overlays and layered presentations that require high resolution and rich color. For best results use dye inks.

4 mil Clear Polyester Film
for Water-Based Inkjet Printers
Product Number: KJTF3000
Caliper/Gauge: 4.7 mil
Material: Gloss Clear Polyester Film
Weight: 140 g/m2
Opacity: Clear
Tensile Strength: 28,000 psi/MD 23,000 psi/TD
Elongation at Break: 150%/MD 110%/TD
Gloss Level: 80 (avg) @ 60°
Printer/Ink Compatibility:
Ink saturation level of this product is 300% and gloss film setting on most RIPs is appropriate. Inkjet
coating is designed for use primarily with dye based inks. Use of pigmented inks is dependent
on application. Product can be printed on Encad/Kodak, Hewlett-Packard DesignJet (2xxx/3xxx
/5xxx), ColorSpan Displaymaker and Epson Stylus Pro (7xxx/9xxx).
Ink Dry Time: Varies with type and amount of ink, relative humidity
and temperature.
Printing: 60-80° F, 50% Relative Humidity
Ideal Storage Conditions: 70° F (21° C), 50% Relative Humidity, store in original
Handling Requirements: Due to absorptive nature of the coating, avoid
touching the coated surface with bare skin. Always
wear cotton gloves when handling inkjet-coated
materials. Rolls are supplied withthe coated surface
wound out. When rolling graphics, always roll so that the
thinner material is on the outside surface of roll.
Shelf Life: 1 year from ship date when stored in proper conditions.

Finishing/Lamination Can be laminated with either pressure sensitive or low
temperature thermal laminate. Before lamination,
please allow image to dry for 24 hours.

Additional information


, , ,

Ink Type

Product Type

Media Type



Surface Finish



There are no reviews yet.

Be the first to review “Kapco 4 mil Clear Polyester (Transparency) Film”

Your email address will not be published.

Free Shipping Same Day oversized items excluded, Rush shipping availableDistribution Locations