General Furmulations Concept 202

Description

General Furmulations Concept 202

General Furmulations Concept 202
3.4 Mil Calendered Matte White Inkjet Vinyl with Removable Adhesive.
• Up to 2 year outdoor durability.
• Clear removable adhesive, clean removability in 1 year.
• 76lb silicone-coated paper liner.
• Great for indoor and outdoor signage and banners, and POP.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex and Screen Print.

http://generalformulations.com/PDFs/202%20VFW-ARLT.pdf

Product Bulletin

Manufacturer of Pressure Sensitive Films,
Traffic Graffic Floor Advertising Films,
Custom Coatings and Printing Inks.

309 S. Union • P.O. Box 158 • Sparta, Michigan 49345 • (616) 887-7387 • (800)253-3664 • FAX (616)887-0537
Web Site: www.generalformulations.com • e-mail: [email protected]

We believe the information on this product to be accurate. However, since we cannot anticipate or control the conditions under which this information or our products may be used, we cannot guarantee
results obtained through their use. Tests of our products should be made by users to determine the suitability of these products for a specific purpose. The products are sold without warranty, either
express or implied. The purchaser should refer to General Formulations, Inc’s Price List for Terms and Conditions or Sale, Including Disclaimer of Warranties and Limitation of Liability.

Concept® 202
FLEXIBLE MATTE WHITE PVC
REMOVABLE ADHESIVE

ConceptÒ 202 is a 3.4-mil premium white matte flexible calendared vinyl film coated with 200-4982 removable acrylic pressure
sensitive adhesive laminated to a 90# layflat liner. This film is designed to accept a variety of solvent-based inkjet and UV curable
inks common to wide format digital printing systems.

Applications ConceptÒ 202 is designed for temporary interior or exterior signage, decals, nameplates, die-

cut letters and point-of-purchase displays.

Thickness Film 3.4 mils.
Adhesive .8 to 1.0 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)

Dimensional Stability Good.

Temperature Ranges Minimum application temperature is +40°F.
Service temperature is -40°F to +180°F.

Expected Exterior Exposure Removable up to 1 year under normal conditions.

Adhesion To glass 5 to 15 oz. /in.
To standard test panels 5 to 15 oz. /in.
Tested according to PSTC-1 with 24-hour dwell at 70°F and 50% relative humidity. Typical
values. Individual values may vary. Test thoroughly before production.

Water Resistance Good.
Test if immersed.
Humidity Resistance Good.
Solvent Resistance Good

Storage Stability 6 months shelf life when stored at 70°F and 50% relative humidity.

Product Codes 202-54, 202-54RW, 202-60 (White, non-topcoated)

Recommendations Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent
penetration resulting in vinyl degradation.