Self-wound, double-sided white application tape with a PVC carrier. High tack adhesive offers secure
bond on rough surfaces, plastic, wood, signs and more. Great for the mounting of heavy decorative
materials, displays, signs and banners.
Physical Properties
The following information on physical and chemical characteristics is based upon tests believed to be reliable.
The values are intended only as a source of information. They are given without guarantee and do not constitute a
warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her
specific purpose. (Data represents averages and is not intended for use as a specification).
Thickness (without liner): 9 mils
Steel Adhesion: 110 oz/in
Tensile Strength: 22 lbs/in
Elongation: 35%
Temperature Resistance: 70° C Short Term; 60° C Long Term
Standard Warranty
All statements, technical information and recommendations about Kapco products are based upon tests believed to be reliable
but do not constitute a guarantee or warranty. All Kapco products are sold with the understanding that the Purchaser has
independently determined the suitability of such product for its purposes. Kapco products are warranted to be free from
defects in material and workmanship for either one year (or the period stated on the specific product information literature in
effect at time of delivery, if longer) from date of shipment if said product is properly stored and applied. It is expressly agreed
and understood that Kapco’s sole obligation and Purchaser’s exclusive remedy under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited to repair or replacement of defective product without charge at Kapco’s plant
or at the location of product (at Kapco’s election), or in the event replacement or repairs is not commercially practical, to
Kapco’s issuing Purchaser a credit reasonable in light of the defect in the product.
Kapco’s liability for defective products shall not exceed the purchase price paid therefore by Purchaser and in no event shall
Kapco be responsible for any incidental or consequential damages whether foreseeable or not, caused by defects in such
product, whether such damage occurs or is discovered before or after replacement or credit, and whether or not such
damage is caused by Kapco’s negligence.
No express warranties and no implied warranties, whether of merchantability or fitness for any particular use, or otherwise
(except as to title) other than those expressly set forth above which are made expressly in lieu of all other warranties, shall
apply to products sold by Kapco. Kapco specifically disclaims and excludes all other such warranties, no waiver, alteration,
addition or modification of the foregoing conditions shall be valid unless made in writing and manually signed by an officer of

BT150 Banner Tape–Create banner pole pockets without stitching or glue ing. Apply high-tack clear adhesive banner tape to the back edge of your banner, measure the width of your pocket needed, peel off the yellow liner and fold banner over creating your pocket!







Additional information

Product Type


Free Shipping Same Day oversized items excluded, Rush shipping availableDistribution Locations