Avery UC900 LIGHT CONTROL DIFFUSER PERMANENT WHITE 30% DIFFUSER

Description

Avery UC900 LIGHT CONTROL DIFFUSER PERMANENT WHITE 30% DIFFUSER
Avery Dennison® UC 900 Diffuser Films are premium quality cast films which are specially designed for graphic applications involving illuminated light box applications. Avery Dennison® UC 900 Diffuser Films are designed to provide partial light blocking to prevent “hot spots” in backlit signage.

BCI Imaging Supplies FullLineSellSheet

Avery Dennison® UC 900 Ultimate
Cast Series
White Diffuser – Permanent – Kraft
(formerly: A5000 Series Diffuser Films )
Revision: 1 Dated: 11/18/13
Product Data Sheet
Page 1 of 3
averygraphics.com
AnswerLine: 800-231-4654
Uses:
Avery Dennison® UC 900 Diffuser Films are
premium quality cast films which are
specially designed for graphic applications
involving illuminated light box applications.
Avery Dennison® UC 900 Diffuser Films are
designed to provide partial light blocking to
prevent “hot spots” in backlit signage.
Face: 2.1 mil (53 microns)
cast film
Adhesive: Clear Permanent
Acrylic
Liner: 78# Kraft
Durability: 5 years
Application
Surfaces:
Flat
Features:
• Outstanding durability and outdoor performance
• Dimensionally stable liner for easy converting
• Excellent conversion on CAD plotters
• Easy cutting & weeding
• Excellent dimensional stability
• Excellent UV, temperature, humidity, and salt-spray resistance
• Eliminates tube light show through
• Reduces brightness of lighting
Conversion:
• Thermal Die-Cutting
• Flat Bed Sign-Cut
• Drum Roller Sign-Cut
• Steel Rule Die-Cutting
Common Applications:
• Architectural Signage
• Directional Signage
• Backlit Rigid Signs
• Flexible Sign faces
• Outdoor advertising

Avery Dennison® UC 900 Ultimate
Cast Series
White Diffuser – Permanent – Kraft
(formerly: A5000 Series Diffuser Films )
Revision: 1 Dated: 11/18/13
Product Data Sheet
Page 2 of 3
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 2.1 mil (53 µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.0015”(0.4mm)
Tensile at Yield 4.0 – 8.0 lb/in (0.7–1.5
kg/cm)
Elongation 100% min.
Gloss matte
Adhesion:
Polycarbonate
24 hr.
1 week
4.5 lbs/in (788 N/m)
4.6 lbs/in (805 N/m)
Signtech®
Flexface FX
24 hr.
1 week
4.3 lbs/in (753 N/m)
4.6 lbs/in (805 N/m)
Flammability Self Extinguishing
Shelf-Life 2 years from date on label
(up to 2 years
unprocessed, OR process
within one year and apply
within 1 year of processing)
Durability Vertical
Exposure
5 years

Min. Application
Temperature
40° F (4° C)
Service
Temperature
-20° – 175°F (-29° – 79° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either two years (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.
Avery Dennison® UC 900 Ultimate
Cast Series
White Diffuser – Permanent – Kraft
(formerly: A5000 Series Diffuser Films )
Revision: 1 Dated: 11/18/13
Product Data Sheet
Page 3 of 3
averygraphics.com
AnswerLine: 800-231-4654
Colors: Cross Reference
SPECIALTY SERIES –
90#
AVERY DENNISON 100
SPECIALTY FILMS
PERMANENT KRAFT
SPECIALTY SERIES –
90#
AVERY DENNISON 100
SPECIALTY FILMS
PERMANENT KRAFT
A5847-S White 30%
Diffuser
UC 900-147-S White 30%
Diffuser
A5848-S White 60%
Diffuser
UC 900-148-S White 60%
Diffuser
NOTE: Some color fade may occur in severe environmental areas. Reference IB 1.30 for durability guidelines.
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
AVERY DENNISON 100
SPECIALTY FILMS
PERMANENT STAFLAT™
SPECIALTY SERIES –
90#
AVERY DENNISON 100
SPECIALTY FILMS
PERMANENT STAFLAT™
A5851-S White
Blockout UC 900-151-S White Blockout A5852-S Black Blockout UC 900-152-S Black Blockout
COMMENTS: 152 – Black has a white reverse side
NOTE: Some color fade may occur in severe environmental areas. Reference IB 1.30 for durability guidelines.
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
UC900-147-S PERM KR-A WHITE 30% DIFFUSER 5847S

392807M48R A113047 UC900-147-S PERM KR WHITE 30% DIFFUSER 48″
5847SA A004556 UC900-147-S PERM KR-A WHITE 30% DIFFUSER 15″ x 10 yd Pun
0 A004559 UC900-147-S PERM KR-A WHITE 30% DIFFUSER 15″ x 50 yd
5847SK A004561 UC900-147-S PERM KR-K WHITE 30% DIFFUSER 24″ x 10 yd
5847SE A004558 UC900-147-S PERM KR-E WHITE 30% DIFFUSER 30″ x 10 yd Pun
0 A004560 UC900-147-S PERM KR-E WHITE 30% DIFFUSER 30″ x 50 yd Pun
5847SR A004564 UC900-147-S PERM KR-R WHITE 30% DIFFUSER 48″ x 10 yd
5847SM A004562 UC900-147-S PERM KR-M WHITE 30% DIFFUSER 24″ x 50 yd
5847SQ A004563 UC900-147-S PERM KR-Q WHITE 30% DIFFUSER 30″ x 50 yd
5847SS A004565 UC900-147-S PERM KR-U WHITE 30% DIFFUSER 48″ x 100 yd
5847SU A004567 UC900-147-S PERM KR-U WHITE 30% DIFFUSER 48″ x 50 yd
0 A113049 UC900-148-S PERM SF WHITE 60% DIFFUSER 48″