Description
Avery MPI3529 PERFORATED FILM 50/50 7 mil White/Black vinyl with removable adhesive for one-way visual panels
Avery Dennison®
MPI 3529 Perforated
Window Film 50/50 is a perforated flexible
calendered film for use on exterior-mount oneway
visual panels. Graphics printed on this
material are visible from the front and
invisible from the back when mounted on
windows. MPI 3528s 50/50 perforation
pattern provides an open area of 50% allowing
for the best possible visibility through a oneway
graphic panel. This film is intended for
vehicle windows or for applications where
visibility through the graphic is importan
Avery Dennison® MPI 3529 Perforated
50/50
PE Coated non-perforated kraft
Revision: 1 Dated: 03/11/15
Product Data Sheet
Page 1 of 3
graphics.averydennison.com
Customer Service: 800-282-8379
Uses:
Avery Dennison®
MPI 3529 Perforated
Window Film 50/50 is a perforated flexible
calendered film for use on exterior-mount oneway
visual panels. Graphics printed on this
material are visible from the front and
invisible from the back when mounted on
windows. MPI 3528s 50/50 perforation
pattern provides an open area of 50% allowing
for the best possible visibility through a oneway
graphic panel. This film is intended for
vehicle windows or for applications where
visibility through the graphic is important.
Face: 6 mil (150 microns)
white/black perforated calendered
vinyl
Adhesive: Removable Acrylic
Liner: One side PE coated nonperforated
kraft paper, (168 g/m2
)
Durability: Up to 1 year (unprinted)
Application
Surfaces:
Flat, simple curves
Features:
Perforated film with white print face, black on adhesive side for one-way vision graphics.
1.5 mil hole provides light transmission with 50% open area
50/50 hole pattern allows visibility for vehicle graphics
Good outdoor durability
Good dimensional stability
Good adhesion level on glass substrates
Good image clarity and color pop
Provides a reduction of indoor solar heat gain for window applications
Conversion:
Screen Printing
Solvent based inkjet
Mild/Eco Solvent inkjet
Latex
Common Applications:
Window Graphics
Vehicle Window
Bus Windows
Building Wraps
Retail Signage
Commercial Signage
Bus Shelters
POP Displays
Other Transparent Surfaces
Avery Dennison® MPI 3529 Perforated
50/50
PE Coated non-perforated kraft
Revision: 1 Dated: 03/11/15
Product Data Sheet
Page 2 of 3
graphics.averydennison.com
Customer Service: 800-282-8379
Physical Characteristics:
Property Value
Caliper, face 6 mil (150µm)
Caliper, adhesive 1.0mil (25 µm)
Open Area 50% (approx)
Perforation Diameter 1.5 mm
Dimensional stability <0.02 (0.5mm)
Note: Ink loads in excess of 250% may cause
increased shrinkage of the printed film.
Tensile at Yield N/A
Elongation N/A
Gloss N/A
Adhesion:
24 hr Stainless
Glass
0.86 lbs/in (150 N/m)
0.7 lbs/in (120 N/m)
Removability Smooth OEM
Painted
Surfaces
1 year
NOTE: Not when applied to:
Nitrocellulose paint, ABS, Polystyrene,
screen printing inks (fresh), certain types of
PVC, Polycarbonate or PMMA
Flammability Self Extinguishing
Shelf-Life Stored at 70°F
(22°C) / 50-55%
RH
1 year
Durability Vertical
Exposure
Up to 1 year unprinted
Min. Application
Temperature
50° F (10° C)
Service Temperature -4°-149°F (-20°-65° C) (Reasonable
range of temperatures which would
be expected under normal
environmental conditions).
Chemical resistance Resistant to most mild acids, alkalis,
and salt solutions.
If not overlaminated, the unprinted
perforated window film is resistant to
water, humidity, solvents, most acids,
alkalis and salt. Due to the open
structure of the film, exposure should
be limited to an absolute minimum.
Overlaminated perforated window film
has the same resistance to chemical
substances as the overlaminated film.
NOTE: Materials have to be properly dried and cured before further processing like laminating,
varnishing, trimming, contour cutting or application. The residual solvents can otherwise change
the products specific features and properties.
Data represents average values where applicable, and is not
intended for specification purposes.
Warranty:
This Warranty applies to the Product listed in this Data
Sheet. All statements, technical information (including
physical and chemical characteristics) and recommendations
about Avery Dennison products are based upon tests
believed to be reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold subject to the
Purchasers assent and agreement that Purchaser is
responsible for, and has independently determined, the
suitability of such products for its purposes or its customers
purposes. Avery Dennison graphics products are warranted
to be free from defects in material and workmanship for two
years from the date of manufacture. When the product is
properly applied, the warranty period is as stated in the
product’s specific Product Data Sheet in effect at the time of
shipment to Avery Dennison’s customer.
Such time periods are subject in either case to the proper
storing and application of said product, and the failure to
properly store or apply the product, including without
limitation the failure to follow any applicable Instructional
Bulletin, negates any warranty. It is expressly agreed and
understood that Avery Dennison’s sole obligation and
Purchaser’s exclusive remedy under this warranty, under
any other warranty, express or implied, or otherwise, shall be
limited exclusively to: (a) repair or replacement of defective
product without charge at Avery Dennison’s plant or at the
location of the product (at Avery Dennison’s election), or (b)
in the event repair or replacement are not commercially
practical, a credit amount up to the price of the product
taking into account the defect in the product in Avery
Dennisons sole discretion.
THE WARRANTY EXPRESSLY SET FORTH ABOVE IS IN
LIEU OF ANY OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR USE AND/OR NONINFRINGEMENT.
SELLER SPECIFICALLY DISCLAIMS
AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO
WAIVER, ALTERATION, ADDITION OR MODIFICATION
OF THE FOREGOING CONDITIONS SHALL BE VALID
UNLESS MADE IN WRITING AND MANUALLY SIGNED BY
AN OFFICER OF AVERY DENNISON.
AVERY DENNISON’S LIABILITY FOR DEFECTIVE
PRODUCTS SHALL NOT EXCEED THE PURCHASE
PRICE PAID THEREFORE BY PURCHASER AND IN NO
EVENT SHALL AVERY DENNISON BE RESPONSIBLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
WHETHER FORESEEABLE OR NOT, CAUSED BY
DEFECTS IN SUCH PRODUCT, WHETHER SUCH
DAMAGE OCCURS OR IS DISCOVERED BEFORE OR
AFTER REPLACEMENT OR CREDIT, AND WHETHER OR
NOT SUCH DAMAGE IS CAUSED BY AVERY
DENNISON’S NEGLIGENCE.
All sales and contracts for sale of Products are subject to
Purchasers assent and agreement to this Warranty. Avery
Dennison hereby objects to any terms or conditions
contained in any purchase order or other communication of
any kind from the Purchaser that is conflicting, inconsistent
or additional to this Agreement
Avery Dennison® MPI 3529 Perforated
50/50
PE Coated non-perforated kraft
Revision: 1 Dated: 03/11/15
Product Data Sheet
Page 3 of 3
graphics.averydennison.com
Customer Service: 800-282-8379
Dimensional stability:
Is measured on a 6 x 6 (150 x 150 mm)aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Removability:
Removable Adhesive means an Avery Dennison® adhesive that can be removed without heat or chemicals within the
period stated on the respective Product Data Sheet and might leave twenty percent (20%) or less adhesive residue.
This product is not removable when applied to: Nitrocellulose paint, ABS, Polystyrene, screen printing inks (fresh), certain
types of PVC, Polycarbonate or PMMA
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature.
One hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied 72 hours after application the
panels are immersed in the test fluid for the given test period. One hour after removing the panel from the fluid, the
specimen is examined for any deterioration.
Special Considerations:
Because of the unique properties and varieties of glass, special considerations must be considered for windows and
graphic applications. Avery Dennison® accepts no liability for glass breakage.
Glass absorbs heat when exposed to sunlight. The degree of absorption across windows can vary because of
shading, heating, and cooling ventilation, and insulation from window frames. These temperature differences across
the window produce stress, which can cause glass breakage. The ability of glass to resist breakage because of
temperature stress is affected by window size, glass thickness, glass treatments, quality, and design.
Window cleaning methods also vary, from the type of cleaners used, to the washing methods employed. Specific
chemicals used in window cleaners may affect the adhesion of pressure-sensitive graphics. Power washing
methods may impact the adhesion of graphics if the water pressure or temperature exceeds the graphics adhesion
capability.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
Avery MPI3529 PERFORATED FILM 50/50 7 mil White/Black vinyl with removable adhesive for one-way visual panels 6223 6204 6205 5978 5977
Reviews
There are no reviews yet.