Description
Avery MPI3323 MATTE GPRM CCK 3 mil White matte opaque vinyl with a permanent gray adhesive
Avery PC MPI 3320 Matte Series are tough,
scuff-resistant, flexible white promotional
calendered vinyl films that deliver consistent
print images at an exceptional value. Avery
PC MPI 3320 and 3323 Matte feature a
clear and gray permanent adhesive
designed for short to medium term
promotional graphics while the Avery PC
MPI 3321 and 3322 offer a clear and gray
adhesive for promotional applications
requiring removable adhesive performance.
These films are well suited for applications
such as Point-of-Purchase, Product
Identification Labels, as well as Outdoor and
General Signage.
Avery® PC MPI 3320 Matte Series
MPI 3320 / 3321 / 3322 / 3323
Clear Permanent/ Clear Removable / Gray Removable / Gray Permanent Kraft
Revision: 1 Dated: 02/07/2013
Product Data Sheet
Page 1 of 3
averygraphics.com
AnswerLine: 800-231-4654
Uses: Avery PC MPI 3320 Matte Series are tough,
scuff-resistant, flexible white promotional
calendered vinyl films that deliver consistent
print images at an exceptional value. Avery
PC MPI 3320 and 3323 Matte feature a
clear and gray permanent adhesive
designed for short to medium term
promotional graphics while the Avery PC
MPI 3321 and 3322 offer a clear and gray
adhesive for promotional applications
requiring removable adhesive performance.
These films are well suited for applications
such as Point-of-Purchase, Product
Identification Labels, as well as Outdoor and
General Signage.
Face: 3.4 mil (86 microns) Matte
Adhesive: Acrylic
MPI 3320 – Permanent (clear)
MPI 3321 – Removable (clear)
MPI 3322 – Removable (gray)
MPI 3323 – Permanent (gray)
Liner: Clay-Coated Kraft
Durability: Up to 4 years
(unprinted)
Application
Surfaces:
Flat, simple curves (restricted to
non-spill areas)
Features:
Consistent Printability
Excellent image clarity and color pop
Easy to handle liner for trouble free converting
ICC profiles available on Avery website (www.iccprofiles.averygraphics.com)
Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Thermal Transfer
Screen Printing
Cold Overlaminating
Water based inkjet
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet
Latex Inkjet
Note: Product is not recommended for use on drum digital printers or sheet-fed conversion.
Common Applications:
Fleet
Vehicle
Marine/ Watercraft
Backlit Signs
Wall Murals
POP/ Tradeshow
Window Graphics
Outdoor Signage
Floor Graphics
Avery® PC MPI 3320 Matte Series
MPI 3320 / 3321 / 3322 / 3323
Clear Perm/ Clear Removable / Gray Removable / Gray Perm Kraft
Revision: 1 Dated: 02/07/2013
Product Data Sheet
Page 2 of 3
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 3.4 mil (86 µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.030(0.762 mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile @ 16%
Tensile @ Break
6.0 lb/in (1.1 kg/cm)
12.2 lb/in (2.3 kg/cm)
Elongation Min 150%
Gloss Hunter Gloss
@ 60
55 ±10
Adhesion: 15 min
Permanent
Removable
2.5 lb/in (438 N/m)
1.0-2.0 lb/in (175-350 N/m)
24 hr Permanent
Removable
3.9 lb/in (683 N/m)
1.5-3.0 lb/in (263-525 N/m)
Removability MPI 3321
MPI 3322
1 year from most
substrates.
Flammability Self Extinguishing
Shelf-Life 2 years from date on label
(up to 2 years
unprocessed, OR process
within one year and apply
within 1 year of processing)
Durability Vertical
Exposure
Unprinted 4 years
Printed Up to 3 years
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-40° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either one year (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.
Avery® PC MPI 3320 Matte Series
MPI 3320 / 3321 / 3322 / 3323
Clear Perm/ Clear Removable / Gray Removable / Gray Perm Kraft
Revision: 1 Dated: 02/07/2013
Product Data Sheet
Page 3 of 3
averygraphics.com
AnswerLine: 800-231-4654
Dimensional stability:
Is measured on a 6 x 6 (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Removability:
Avery Dennison does not guarantee removability from the following substrates:
Surfaces with poor paint-to-substrate adhesion
Wallboard
Existing graphics that must remain intact; damage to existing graphic when film is removed
Aged paint or metal that may have surface oxidation or chalking
Outdoor, horizontal surfaces
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
Avery MPI3323 MATTE GPRM CCK 3 mil White matte opaque vinyl with a permanent gray adhesive 5232 5234 5235 5236 5237
Custom Finish – CTO A113748 MPI3323 MATTE GPRM CCK 54″
Custom Finish – CTO A113788 MPI3323 MATTE GPRM CCK 60″
Stock A003922 MPI3323 MATTE GPRM CCK 60X50 YDS 3IN
FTO A003926 MPI3323 MATTE GPRM CCK 60X100 YDS 3IN
FTO A003927 MPI3323 MATTE GPRM CCK 60X250 YDS 3IN
Stock A003919 MPI3323 MATTE GPRM CCK 54X50 YDS 3IN
CTO A003921 MPI3323 MATTE GPRM CCK 54X100 YDS 3IN
Stock A003917 MPI3323 MATTE GPRM CCK 30X50 YDS 3IN
Sample A010502 MPI3323 MATTE GPRM CCK 54X5
Reviews
There are no reviews yet.