Cart

Avery MPI2902 GLOSS GREM SF 3.2 mil White gloss opaque vinyl with a gray removable adhesive

$269.00

SKU: Avery MPI2902 GLOSS GREM SF 3.2 mil White gloss opaque vinyl with a gray removable adhesive Categories:

Description

Avery MPI2902 GLOSS GREM SF 3.2 mil White gloss opaque vinyl with a gray removable adhesive
Avery Dennison® IC MPI 2900, 2902, and 2903Gloss are flexible calendered vinyl films. IC MPI 2900, 2902, and 2903 Gloss offer exceptional value for applications requiring a glossy mid-term durable product combined with a permanent or removable adhesive. IC MPI 2900, 2902, and 2903 Gloss films are well suited for applications such as Point-of-Purchase, Product Identification Labels, Medium Term OEM Decals as well as Outdoor and General Signage.

BCI Imaging Supplies
Avery Dennison® IC MPI 2900 / 2902 /
2903 Gloss
Permanent / Removable StaFlat™
(formerly: MPI 3100 / 3101/ 3103)
Revision: 9 Dated: 12/02/13
Product Data Sheet
Page 1 of 3
averygraphics.com
AnswerLine: 800-231-4654
Uses:
Avery Dennison® IC MPI 2900, 2902, and
2903Gloss are flexible calendered vinyl
films. IC MPI 2900, 2902, and 2903 Gloss
offer exceptional value for applications
requiring a glossy mid-term durable product
combined with a permanent or removable
adhesive. IC MPI 2900, 2902, and 2903
Gloss films are well suited for applications
such as Point-of-Purchase, Product
Identification Labels, Medium Term OEM
Decals as well as Outdoor and General
Signage.
Face: 3.0 mil (76 microns)high
gloss calendered
Adhesive: Acrylic
MPI 2900 – Perm (clear)
MPI 2902 – Rem (gray)
MPI 2903 – Perm (gray)
Liner: 90# StaFlat™
Durability: Up to 5years
(unprinted)
Application
Surfaces:
Flat, simple curves (restricted to
non-spill areas)
Features:
• Gray adhesive provides opacity to covers whatever is underneath
• Gloss finish
• Good durability and outdoor performance for short to mid-term applications
• Great image clarity and color pop
• ICC profiles available on the Avery Dennison website (www.iccprofiles.averygraphics.com)
Conversion:
• Thermal Die-Cutting
• Flat Bed Sign-Cut
• Drum Roller Sign-Cut
• Steel Rule Die-Cutting
• Solvent based inkjet
• Mild/Eco Solvent inkjet
• UV inkjet
• Latex Inkjet
Common Applications:
• Fleet (flat & simple curve only)
• Vehicle (flat & simple curve
only)
• Wall Murals
• POP/ Tradeshow
• Outdoor Signage
• Floor Graphics
• Ice Rink Boards /Dasher Boards

Avery Dennison® IC MPI 2900 / 2902 /
2903 Gloss
Permanent / Removable StaFlat™
(formerly: MPI 3100 / 3101/ 3103)
Revision: 9 Dated: 12/02/13
Product Data Sheet
Page 2 of 3
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 3.0 mil (76µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.065”(1.651 mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield
Elongation
Gloss Hunter Gloss
@ 60
90 ±10
Adhesion: 15 min.
MPI2900
Adhesive
Perm
(clear)
4.7 lbs/in (831 N/m)
MPI2902 Rem
(gray)
2.5 lbs/in (438 N/m)
MPI2903 Perm
(gray)
5.5 lbs/in (962 N/m)
Adhesion: 24 hr
MPI2900
Adhesive
Perm
(clear)
5.5 lbs/in (962 N/m)
MPI2902 Rem
(Gray)
5.4 lbs/in (945 N/m)
MPI2903 Perm
(Gray)
5.5 lbs/in (962 N/m)
Removability MPI 2902 3 years from most
substrates. Surface must
be sealed.
Flammability Self Extinguishing
Shelf-Life 2 years from date on label
(up to 2 years
unprocessed, OR process
within one year and apply
within 1 year of processing)
Durability Vertical
Exposure
Unprinted – 5 years
Printed – Up to 3 years
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-40° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either two years (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery Dennison® IC MPI 2900 / 2902 /
2903 Gloss
Permanent / Removable StaFlat™
(formerly: MPI 3100 / 3101/ 3103)
Revision: 9 Dated: 12/02/13
Product Data Sheet
Page 3 of 3
averygraphics.com
AnswerLine: 800-231-4654
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Removability:
Avery Dennison® does not guarantee removability from the following substrates:
• Surfaces with poor paint-to-substrate adhesion
• Wallboard
• Existing graphics that must remain intact; damage to existing graphic when film is removed
• Aged paint or metal that may have surface oxidation or chalking
• Outdoor, horizontal surfaces
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
Avery MPI2902 GLOSS GREM SF 3.2 mil White gloss opaque vinyl with a gray removable adhesive 3494

 

Custom Finish – FTO A113382 MPI2902 GLOSS GREM SF 54″
Stock A001498 MPI2902 GLOSS GREM SF 54X50 YDS 3IN
Sample A010504 MPI2902 GLOSS GREM SF 54X5

Additional information

Product Type

Size

Thickness

Brands

Ink Type

, , ,

Color

Surface Finish

Media Type

Reviews

There are no reviews yet.

Be the first to review “Avery MPI2902 GLOSS GREM SF 3.2 mil White gloss opaque vinyl with a gray removable adhesive”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations