Cart

Avery MPI1060 Gloss Transparent 2.1 mil Clear Gloss Cast vinyl.

$803.00$1,975.00

Description

Avery MPI1060 Gloss Transparent 2.1 mil Clear Gloss Cast vinyl.
Avery Dennison® UC MPI 1060 Gloss Transparent film is a premium quality, flexible, high gloss conformable vinyl film designed for use in architectural, transportation, and general signage markings.

https://graphics.averydennison.com/en/home/graphics-products/digitally-printable-films/supercast-digital-color-graphics/mpi-1060-transparent-films.html

BCI Imaging Supplies
Avery Dennison® UC MPI 1060 Gloss
Transparent
Permanent StaFlat™
(formerly: MPI 1020)
Revision: 5 Dated: 12/02/13
Product Data Sheet
Page 1 of 3
averygraphics.com
AnswerLine: 800-231-4654
Uses:
Avery Dennison® UC MPI 1060 Gloss
Transparent film is a premium quality,
flexible, high gloss conformable vinyl film
designed for use in architectural,
transportation, and general signage
markings.
Face: 2.1 mil (53 microns)high
gloss cast film
Adhesive: Permanent Acrylic
(clear)
Liner: 90# StaFlat™
Durability: Up to 9 years
(unprinted)
Application
Surfaces:
Flat, Flat with Rivets,
Corrugations, Complex Curves
Features:
• High gloss finish
• Superior conformability to irregular substrates
• Outstanding durability and outdoor performance
• Dimensionally stable liner for easy converting
• Excellent dimensional stability
• Meets CPSIA standards for limitations on lead and phthalates
Conversion:
• Thermal Die-Cutting
• Flat Bed Sign-Cut
• Drum Roller Sign-Cut
• Steel Rule Die-Cutting
• UV inkjet
Common Applications:
• Backlit Signs
• POP/ Tradeshow
• Window Graphics
• Outdoor Signage
• Floor Graphics

Avery Dennison® UC MPI 1060 Gloss
Transparent
Permanent StaFlat™
(formerly: MPI 1020)
Revision: 5 Dated: 12/02/13
Product Data Sheet
Page 2 of 3
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 2.1 mil (53µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.15”(0.4mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield 4.0 – 8.0 lb/in (0.7–1.5
kg/cm)
Elongation 100% min.
Gloss Hunter Gloss
@ 60
90
Adhesion: 15 min. 3.0lbs/in (525 N/m)
24 hr. 4.0lbs/in (700 N/m)
Flammability Self Extinguishing
Shelf-Life 2 years from date on label
(up to 2 years
unprocessed, OR process
within one year and apply
within 1 year of processing)
Durability Vertical
Exposure
Unprinted – 9 years
Printed – Up to 5 years
Min. Application
Temperature
40° F (4° C)
Service
Temperature
-40° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either two years (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery Dennison® UC MPI 1060 Gloss
Transparent
Permanent StaFlat™
(formerly: MPI 1020)
Revision: 5 Dated: 12/02/13
Product Data Sheet
Page 3 of 3
averygraphics.com
AnswerLine: 800-231-4654
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm)aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
Avery MPI1060 Gloss Transparent 2.1 mil Clear Gloss Cast vinyl. 3395 4487
3261 3246 356027148R

 

CTO A001401 MPI1060 GLOSS PERM SF 60X100 YDS 3IN
Stock A001407 MPI1060 GLOSS PERM SF 60X50 YDS 3IN
Stock A003402 MPI1060 GLOSS PERM SF 48X100 YDS 3IN
Stock A001454 MPI1060 GLOSS PERM SF 48X50 YDS 3IN

Additional information

Product Type

Size

, , ,

Thickness

Brands

Media Type

, ,

Reviews

There are no reviews yet.

Be the first to review “Avery MPI1060 Gloss Transparent 2.1 mil Clear Gloss Cast vinyl.”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations