Cart

Avery MPI 2902 (Formerly MPI 3101)

$219.00$243.00

Avery MPI 2902 features an opaque, removable adhesive for mid-term promotions and cover-ups. MPI 2902 is well suited for applications such as Point of Purchase, Wall Murals, Floor Graphics, Product Identification Labels, Medium Term OEM Decals as well as Outdoor and General Signage. MPI 2902 Calendered film is recommended for use with solvent, eco-solvent, and UV-curable printers and is outdoor-durable for up to four years. Other product features include: High gloss face finish for excellent print quality and showroom “pop” Pigmented adhesive provides optimum opacity ICS Warranty approved for ICS qualified print providers Improved 70# Sta-Flat® liner for ideal converting performance

 

MPI 2903 Glossy Opaque Calendered Vinyl
“MPI 2903 features an opaque, permanent adhesive for short-term to mid-term promotions and cover-ups. MPI 2903 is well suited for applications such as Point of Purchase, Trade Show Graphics as well as Outdoor and General Signage. MPI 2903 Calendered film is recommended for use with solvent, eco-solvent, and UV-curable printers and is outdoor-durable for up to four years. Other product features include: High gloss face finish for excellent print quality and showroom “pop” Pigmented permanent adhesive provides optimum opacity and permanence ICS Warranty approved for ICS qualified print providers 70# Sta-Flat™ liner for ideal converting performance

MPI 2903 Glossy Opaque Calendered Vinyl

Description
54″ x 50 yd. MPI 2903 Glossy Opaque Calendered Vinyl
60” x 50 yd. MPI 3103 Glossy Opaque Calendered Vinyl

Clear

Description

Avery MPI 2902 (Formerly MPI 3101)

Avery MPI 2902 (Formerly MPI 3101)
3.2 Mil Calendered Gloss White Inkjet Vinyl with Removable Adhesive.
• 4 year outdoor durability when laminated.
• Grey opaque removable adhesive, clean removability in 3 years.
• Polyethylene coated StaFlat® liner.
• Great for POP, wall murals, floor graphics, general signage and banners.
• Avery Dennison recommends laminating with DOL 2000 or DOL 3000 series for a great value.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex, Screen Print.

http://averygraphics-resources.com/PDFs/PD_Sheets/PDS_IC_MPI_2900-2902-2903_Gloss.pdf

Avery® IC MPI 2900 / 2902 / 2903 Gloss
Permanent / Removable StaFlat
(formerly: MPI 3100 / 3101 / 3103)
Revision: 8 Dated: 02/07/2013
Product Data Sheet
Page 1 of 3

averygraphics.com
AnswerLine: 800-231-4654

Uses: Avery IC MPI 2900, 2902, and 2903 Gloss
are flexible calendered vinyl films. IC MPI
2900, 2902, and 2903 Gloss offer
exceptional value for applications requiring a
glossy mid-term durable product combined
with a permanent or removable adhesive.
IC MPI 2900, 2902, and 2903 Gloss films
are well suited for applications such as
Point-of-Purchase, Product Identification
Labels, Medium Term OEM Decals as well
as Outdoor and General Signage.

Face: 3.0 mil (76 microns) high
gloss calendered
Adhesive: Acrylic
MPI 2900 – Perm (clear)
MPI 2902 – Rem (gray)
MPI 2903 – Perm (gray)

Liner: 90# StaFlat
Durability: Up to 4 years
(unprinted)
Application
Surfaces:
Flat, simple curves (restricted to
non-spill areas)

Features:
• Gray adhesive provides opacity to covers whatever is underneath
• Gloss finish
• Good durability and outdoor performance for short to mid-term applications
• Great image clarity and color pop
• ICC profiles available on Avery website (www.iccprofiles.averygraphics.com)

Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Thermal Transfer
Screen Printing
Cold Overlaminating
Water based inkjet
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet
Latex Inkjet

Common Applications:
Fleet (flat & simple curve only)
Vehicle (flat & simple curve only)
Wall Murals
POP/ Tradeshow
Outdoor Signage
Floor Graphics
Ice Rink Boards /Dasher Boards

Avery® IC MPI 2900 / 2902 / 2903 Gloss
Permanent / Removable StaFlat
(formerly: MPI 3100 / 3101 / 3103)
Revision: 8 Dated: 02/07/2013

Product Data Sheet
Page 2 of 3

averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 3.0 mil (76 µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.065”(1.651 mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield
Elongation
Gloss Hunter Gloss
@ 60
90 ±10

Adhesion: 15 min.
MPI2900
Adhesive
Perm
(clear)

4.7 lbs/in (831 N/m)

MPI2902 Rem
(gray)
2.5 lbs/in (438 N/m)

MPI2903 Perm
(gray)
5.5 lbs/in (962 N/m)

Adhesion: 24 hr
MPI2900

Adhesive
Perm
(clear)

5.5 lbs/in (962 N/m)

MPI2902

Rem
(Gray)
5.4 lbs/in (945 N/m)

MPI2903 Perm
(Gray)
5.5 lbs/in (962 N/m)
Removability MPI 2902 3 years from most
substrates. Surface must
be sealed.
Flammability Self Extinguishing

Shelf-Life 2 years from date on label
(up to 2 years
unprocessed, OR process
within one year and apply
within 1 year of processing)
Durability Vertical
Exposure
Unprinted – 4 years
Printed – Up to 3 years
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-40° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.

Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)

Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either one year (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.

Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.

NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery® IC MPI 2900 / 2902 / 2903 Gloss
Permanent / Removable StaFlat
(formerly: MPI 3100 / 3101 / 3103)
Revision: 8 Dated: 02/07/2013

Product Data Sheet
Page 3 of 3

averygraphics.com
AnswerLine: 800-231-4654
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.

Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.

Removability:
Avery Dennison does not guarantee removability from the following substrates:
• Surfaces with poor paint-to-substrate adhesion
• Wallboard
• Existing graphics that must remain intact; damage to existing graphic when film is removed
• Aged paint or metal that may have surface oxidation or chalking
• Outdoor, horizontal surfaces

Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.

Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.

Revisions are italicized

Avery Dennison is a registered trademark of Avery Dennison Corp

Additional information

Size

,

Brands

Product Type

, , ,

Media Type

,

Thickness

Surface Finish

Adhesive Type

Color

Print compatibility

, , , ,

Reviews

There are no reviews yet.

Be the first to review “Avery MPI 2902 (Formerly MPI 3101)”

Your email address will not be published.

BCI Offers FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations