Cart

Avery MPI 2528 (Formerly MPI 4002)

$730.00$822.00

Avery Dennison White Perforated Window Film is a perforated flexible calendered film for use on one way visual panels. Graphics printed on this material are visiblefrom the front and “invisible” from the back when mounted on windows.

MPI 2528
(Formerly MPI 4002)
7 Mil Calendered Perforated
Window Film
• Permanent clear acrylic adhesive, 1 year clean
removability
• .Conforms over flat, simple curves
• 50/50 perforation pattern
• 1.5 mm hole size
• Up to 2 year durability when printed and
overlaminated
• Print compatibility: Solvent, Eco-Solvent, UV,
Latex, Screen Print

Clear

Description

Avery MPI 2528 (Formerly MPI 4002)

Avery MPI 2528 (Formerly MPI 4002)
7 Mil Calendered Perforated Window Film.
• Permanent clear acrylic adhesive, 1 year clean removability.
• .Conforms over flat, simple curves.
• 50/50 perforation pattern.
• 1.5 mm hole size.
• Up to 2 year durability when printed and overlaminated.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex, Screen Print.

http://averygraphics-resources.com/PDFs/PD_Sheets/PDS_HP_MPI_2528_Perf_50-50.pdf

Avery®
HP MPI 2528 Perforated 50/50
Permanent StaFlat
(formerly: MPI 4002)
Revision: 4 Dated: 12/17/2010
Product Data Sheet
Page 1 of 3

Uses: Avery HP MPI 2528 Perforated Window Film
50/50 is a perforated flexible calendered film
for use on exterior-mount one-way visual
panels. Graphics printed on this material
are visible from the front and “invisible” from
the back when mounted on windows. HP
MPI 2528’s 50/50 perforation pattern
provides an open area of 50% allowing for
the best possible visibility through a one-way
graphic panel. This film is intended for
vehicle windows or applications where
visibility through the graphic is important.

Face: 7 mil (178 microns) low gloss
white calendered with black reverse
Adhesive: Removable Acrylic (clear)
Liner: 90# StaFlat with clear back
laminate
Durability: Up to 3 years (unprinted)
Application
Surfaces:
Flat, simple curves

Features:
• One-way visibility for window applications
• 50/50 hole pattern allows visibility for vehicle graphics
• 1.5 mil hole provides light transmission
• Great image clarity and color pop
• Provides up to 50% reduction of indoor solar heat gain for window applications

Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Thermal Transfer
Screen Printing
Cold Overlaminating
Water based inkjet
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet
Latex Inkjet

Common Applications:
Fleet
Vehicle
Marine/ Watercraft
Backlit Signs
Wall Murals
POP/ Tradeshow
Window Graphics
Outdoor Signage
Floor GraphicsAvery®
HP MPI 2528 Perforated 50/50
Permanent StaFlat
(formerly: MPI 4002)
Revision: 4 Dated: 12/17/2010

Product Data Sheet
Page 2 of 3
Graphics & Reflective Products Division AnswerLine: 800-231-4654
250 Chester Street www.averygraphics.com
Painesville, OH 44077

Physical Characteristics:
Property Value
Caliper, face 7 mil (178 µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability

Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield
Elongation
Gloss N/A
Adhesion: 15 min. Removable 4.0 lbs/in (700 N/m)

Flammability Self Extinguishing

Shelf-Life 1 year
Durability Vertical
Exposure
Unprinted – 3 years
Printed – Up to 1 year
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-50° – 180°F (-45° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.

Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)

Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either one year (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.

Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.

NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery®
HP MPI 2528 Perforated 50/50
Permanent StaFlat
(formerly: MPI 4002)
Revision: 4 Dated: 12/17/2010

Product Data Sheet
Page 3 of 3
Graphics & Reflective Products Division AnswerLine: 800-231-4654
250 Chester Street www.averygraphics.com
Painesville, OH 44077

Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.

Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.

Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.

Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.

Special Considerations:
Because of the unique properties and varieties of glass, special considerations must be considered for windows and
graphic applications. Avery Dennison accepts no liability for glass breakage.
• Glass absorbs heat when exposed to sunlight. The degree of absorption across windows can vary because of
shading, heating, and cooling ventilation, and insulation from window frames. These temperature differences across
the window produce stress, which can cause glass breakage. The ability of glass to resist breakage because of
temperature stress is affected by window size, glass thickness, glass treatments, quality, and design.
• Window cleaning methods also vary, from the type of cleaners used, to the washing methods employed. Specific
chemicals used in window cleaners may affect the adhesion of pressure-sensitive graphics. Power washing
methods may impact the adhesion of graphics, if the water pressure or temperature exceeds the graphic’s adhesion
capability.
Revisions are italicized

Avery Dennison is a registered trademark of Avery Dennison Corp.

 

 

 

3254-3365 48″ x 25 yd. Avery MPI 2528 Perforated Window Film
3254-4549 48″ x 100 yd. Avery MPI 2528 Perforated Window Film
3254-3366 54″ x 25 yd. Avery MPI 2528 Perforated Window Film
3254-3098 54″ x 100 yd. Avery MPI 2528 Perforated Window Film

Additional information

Size

,

Brands

Product Type

, ,

Media Type

Thickness

Print compatibility

, , , ,

Pattern Type

Reviews

There are no reviews yet.

Be the first to review “Avery MPI 2528 (Formerly MPI 4002)”

Your email address will not be published.

BCI Offers FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations