Cart

Avery MPI 2120 (Formerly MPI 2010)

$176.00$350.00

Description

Avery MPI 2120 (Formerly MPI 2010)

 

the 2120 is disconnected by Avery 

here is the replacement 

http://www.bciimage.com/shop/replacement-avery-ipm-2120-premium-kapco-matte-vinyl/

Avery  MPI 2120 (Formerly MPI 2010)
3.4 Mil Calendered Matte White Inkjet Vinyl With Permanent Adhesive.
• 6 year outdoor durability.
• Clear, permanent, acrylic adhesive.
• Polyethylene coated 90lb StaFlat®.
• Great for interior or exterior signage, decals, nameplates, die-cut letters and POP’s.
• FR – ASTM E84-04.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex, Screen Print.

http://averygraphics-resources.com/PDFs/PD_Sheets/PDS_HP_MPI_2120-2122_Matte.pdf

Avery MPI 2120

 

 

Avery  MPI 2120 (Formerly MPI 2010) Uses: Avery HP MPI 2120 and 2122 Matte films are flexible calendered vinyl films. Both HP MPI 2120 and 2122 offer exceptional value for applications requiring premium calendered film durability combined with a permanent or removable adhesive performance. Face: 3.4 mil (86 microns) low gloss calendered Adhesive: Acrylic MPI 2120 – Permanent (clear) MPI 2122 – Removable (gray) Liner: 90# StaFlat Durability: Up to 6 years (unprinted) Application Surfaces: Flat, simple curves (restricted to non-spill areas) Features: • 100% opacity, completely covers whatever is underneath • Matte finish • Outstanding durability and outdoor performance • Great image clarity and color pop • Dimensionally stable liner for easy converting • ICC profiles available on Avery website (www.iccprofiles.averygraphics.com) • ASTM E84 Class 1 or A rating Conversion: Thermal Die-Cutting Flat Bed Sign-Cut Drum Roller Sign-Cut Steel Rule Die-Cutting Thermal Transfer Screen Printing Cold Overlaminating Water based inkjet Solvent based inkjet Mild/Eco Solvent inkjet UV inkjet Latex Inkjet Common Applications: Fleet Wall Murals POP/ Tradeshow Outdoor Signage Floor Graphics Avery® HP MPI 2120 / 2122 Matte Permanent / Removable StaFlat (formerly: MPI 2010 / 2012) Revision: 3 Dated: 02/07/2013 Product Data Sheet Page 2 of 3 averygraphics.com AnswerLine: 800-231-4654 Physical Characteristics: Property Value Caliper, face 3.4 mil (86 µm) Caliper, adhesive 1.0mil (25 µm) Dimensional stability <0.065”(1.651 mm) Note: Ink loads in excess of 250% may cause increased shrinkage of the printed film. Tensile at Yield Elongation Gloss Hunter Gloss @ 60 <16 Adhesion: 15 min. Removable 1.8 lbs/in (438 N/m) Permanent 4.7 lbs/in (831 N/m) Removability MPI 2122 5 years from most substrates. Surface must be sealed. Flammability ASTM E84 Class 1 or A rating Self Extinguishing Shelf-Life 2 years from date on label (up to 2 years unprocessed, OR process within one year and apply within 1 year of processing) Durability Vertical Exposure Unprinted – 6 years Printed – Up to 5 years Min. Application Temperature 50° F (10° C) Service Temperature -50° – 180°F (-45° – 82° C) (Reasonable range of temperatures which would be expected under normal environmental conditions). Chemical resistance Resistant to most mild acids, alkalis, and salt solutions. Important: Information on physical and chemical characteristics are based on tests believed to be reliable. The values are intended only as a source of information. This information is given without guaranty and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of any material for their specific purpose. (Data represents average values where applicable, and is not intended for specification purposes) Warranty: All statements, technical information and recommendations about Avery Dennison products are based upon tests believed to be reliable but do not constitute a guarantee or warranty. All Avery Dennison products are sold with the understanding that Purchaser has independently determined the suitability of such products for its purposes. Avery Dennison products are warranted to be free from defects in material and workmanship for either one year (or the period stated on the specific product information literature in effect at time of delivery, if longer) from date of shipment if said product is properly stored and applied. It is expressly agreed and understood that Avery Dennison’s sole obligation and Purchaser’s exclusive remedy under this warranty, under any other warranty, express or implied, or otherwise, shall be limited to repair or replacement of defective product without charge at Avery Dennison’s plant or at the location of product (at Avery Dennison’s election), or in the event replacement or repairs is not commercially practical, to Avery Dennison’s issuing Purchaser a credit reasonable in light of the defect in the product. Avery Dennison’s liability for defective products shall not exceed the purchase price paid therefore by Purchaser and in no event shall Avery Dennison be responsible for any incidental or consequential damages whether foreseeable or not, caused by defects in such product, whether such damage occurs or is discovered before or after replacement or credit, and whether or not such damage is caused by Avery Dennison’s negligence. NO EXPRESS WARRANTIES AND NO IMPLIED WARRANTIES, WHETHER OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE, OR OTHERWISE (EXCEPT AS TO TITLE), OTHER THAN THOSE EXPRESSLY SET FORTH ABOVE WHICH ARE MADE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, SHALL APPLY TO PRODUCTS SOLD BY AVERY DENNISON. AVERY DENNISON SPECIFICALLY DISCLAIMS AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO WAIVER, ALTERATION, ADDITION OR MODIFICATION OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING AND MANUALLY SIGNED BY AN OFFICER OF AVERY DENNISON. Avery® HP MPI 2120 / 2122 Matte Permanent / Removable StaFlat (formerly: MPI 2010 / 2012) Revision: 3 Dated: 02/07/2013 Product Data Sheet Page 3 of 3 averygraphics.com AnswerLine: 800-231-4654 Dimensional stability: Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is measured. Adhesion: (FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of the specimen. Removability: Avery Dennison does not guarantee removability from the following substrates: • Surfaces with poor paint-to-substrate adhesion • Wallboard • Existing graphics that must remain intact; damage to existing graphic when film is removed • Aged paint or metal that may have surface oxidation or chalking • Outdoor, horizontal surfaces Flammability: A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning within 15 seconds after removal from the flame. Also tested to ASTM E-84 method for surface burning characteristics of building materials. Documentation from third party testing agency available upon request. Temperature range: A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1 hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration. Chemical Resistance: All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen is examined for any deterioration. Revisions are italicized Avery Dennison is a registered trademark of Avery Dennison Corp.

Additional information

Size

, , ,

Brands

Product Type

,

Adhesive Type

Thickness

Print compatibility

, , , ,

Surface Finish

Color

Reviews

There are no reviews yet.

Be the first to review “Avery MPI 2120 (Formerly MPI 2010)”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations