Cart

Avery MPI 1005 Super cast Easy Apply RS

$341.00$760.00

Description

Avery MPI 1005 Super cast Easy Apply RS

Avery MPI 1005 Super cast Easy Apply RS.
2 Mil Cast Gloss White Inkjet Vinyl.
• 10 Year outdoor durability.
• Grey, long-term removable RS™ adhesive with Easy Apply™ air egress, slideability, and clean removability for up to 5 years with heat.
• Superior conformability to compound curves, corrugations, rivets, and channels without primer (with DOL 1460).
• 40% more conformable than MPI 1005 EZ RS, at the same great price.
• Even less pattern show through and higher gloss than MPI 1005 EZ RS.
• Great for vehicle and fleet wraps.
• Avery suggests laminating with DOL 1060 or DOL 1080 for maximum durability, DOL 1460 for maximum conformability without the use of primer, or DOL 1300 series for extended durability and great value.
• Print compatibility: Solvent, Eco-Solvent, UV, Screen Print.

AVERY

http://www.spandex.com/Images/Avery_MPI_1005_SC_Easy_Apply_RS_PDS_tcm35-7105.pdf

 

 

 

 

 

 

Avery
MPI™ 1005 Supercast Series Issued: 02-04-2013

Introduction
Avery MPI 1005 Supercast films are gloss white, premium quality self-adhesive cast vinyls. The films are
ultra-conformable and opaque, and offer excellent durability and conformability. Combined with a DOL 1400
series overlaminate, Avery MPI 1005 Supercast films are highly recommended for applications on rivets and
corrugations. In addition, MPI 1005 Supercast films are available with Easy Apply RS™ technology with the
air-egress feature and maximum slideability and repositionability.

Description
Film : 50 micron gloss white cast vinyl
Adhesive : MPI 1005 Supercast Permanent, grey, acrylic based
MPI 1005 Supercast Easy Apply RS Permanent, low tack, repositionable, grey, acrylic based

Backing paper : MPI 1005 Supercast Staflat liner
MPI 1005 Supercast Easy Apply RS Easy Apply RS Staflat liner

Conversion
MPI 1005 Supercast films are ultra-premium products, delivering maximum durability for a wide range of
graphics applications. The films are suitable for use on a variety of super-wide format inkjet printers using
solvent, eco solvent, UV or latex ink.

To enhance colour and to protect images against UV radiation and abrasion, it is recommended to protect
Avery MPI 1005 Supercast films using an overlaminate or varnish.
If the final graphic is used on corrugated vehicles or substrates, use of Avery DOL 1460 Gloss or Avery DOL
1480 Matt conformable overlaminates is recommended.

For recommended combinations of DOL films and media, please refer to “Technical Bulletin 5.3”.
Recommended combinations of Avery® Overlaminates and Avery® Digital Print Media”.
For information on how to apply Avery MPI Cast Films, please refer to “Technical Bulletin 5.9. Application
methods for Avery Cast Films”.

Uses
– Large fleet graphics on flat, curved, riveted and corrugated surfaces
– Interior & exterior signs
– Durable advertising, requiring clean removal after intended period of use
– All permanent applications requiring maximum conformability

Features
– Unparalleled 3D performance*, even for the most demanding corrugations
– Stunning print performance and handling on selected printers
– High gloss or matt finishes*
– Faster, easier installation with Avery Easy Apply RS technology
– Maximum outdoor durability, up to 5 years* printed and 10 years unprinted
– ICS Performance Guarantee
– Clean long-term removability after years of usage
Page 2 of 2
PRODUCT CHARACTERISTICS Avery
MPI™ 1005 Supercast Series

Physical properties

Features Test method1
Results
Caliper, facefilm ISO 534 50 micron

Caliper, facefilm + adhesive
MPI 1005 Supercast ISO 534 80 micron
MPI 1005 Supercast Easy Apply RS ISO 534 85 micron

Elongation DIN 53455 > 100 %
Dimensional stability FINAT FTM 14 0.4 mm max

Adhesion
MPI 1005 Supercast initial FINAT FTM-1, stainless steel 490 N/m
ultimate FINAT FTM-1, stainless steel 770 N/m

MPI 1005 Supercast initial FINAT FTM-1, stainless steel 320 N/m
Easy Apply RS ultimate FINAT FTM-1, stainless steel 700 N/m

Flammability Self-extinguishing
Shelf life Stored at 22° C/50-55 % RH 1 year
Durability, unprinted Vertical exposure 10 years

Temperature range

Features Results
Minimum application temperature: ≥ 7 °C
Service temperature: – 45 °C to + 80 °C

NOTE: Materials have to be properly dried before further processing, like laminating, varnishing or application. The residual
solvents can otherwise change the products’ specific features

For good print and converting result we recommend to let the rolls acclimatize in the print/lamination room at least 24 before
printing or converting. Too much temperature or humidity deviation between material and room climate can cause layflatness
and/or printability issues.
Generally, constant material storage conditions of ideally 20°C (+/-2°C) /50% rh (+/- 5%), without too big climate deviations,
will support a more robust and stable printing/converting process. For further details, please refer to TB 1.11.
__________________________________________________________________________

Important
Information on physical and chemical characteristics is based upon tests we believe to be reliable. The values listed herein are typical values and are not for use
in specifications. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should
independently determine, prior to use, the suitability of this material to their specific use.
All technical data are subject to change.

Warranty
Avery®
branded materials are manufactured under careful quality control and are warranted to be free from defect in material and workmanship. Any material
shown to our satisfaction to be defective at the time of sale will be replaced without charge. Our aggregate liability to the purchaser shall in no circumstances
exceed the cost of the defective materials supplied. No salesman, representative or agent is authorised to give any guarantee, warranty, or make any
representation contrary to the foregoing.
All Avery®
branded materials are sold subject to the above conditions, being part of our standard conditions of sale, a copy of which is available on request.

1) Test methods
More information about our test methods can be found on our website.

2) Durability
The durability is based on middle European exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and
maintenance of the marking. For instance, in the case of signs facing south; in areas of long high temperature exposure such as southern European countries;
in industrially polluted areas or high altitudes, exterior performance will be decreased.

 

 

 

 

 

Additional information

Adhesive Type

Size

, , , ,

Brands

Product Type

, ,

Thickness

Color

Surface Finish

Reviews

There are no reviews yet.

Be the first to review “Avery MPI 1005 Super cast Easy Apply RS”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations