Cart

Avery DOL2080 MATTE PERM KR 3.1 mil Clear matte film on a kraft paper liner

$181.00$344.00

Description

Avery DOL2080 MATTE PERM KR 3.1 mil Clear matte film on a kraft paper liner
Avery HP DOL 2000 Series clear
calendered vinyl films are flexible vinyl films
available in a gloss, luster, or matte finish.
HP DOL 2000 Series overlaminates have
been specifically designed as a protective
overlaminate film for digital or screen printed
graphics.
Finishes:
HP DOL 2060 – Gloss
HP DOL 2070 – Luster
HP DOL 2080 – Matte

BCI Imaging Supplies
Avery® HP DOL 2000 Series
Permanent Kraft
(formerly: DOL 2000 Series – 78# )
Revision: 6 Dated: 10/04/12
Product Data Sheet
Page 1 of 3
averygraphics.com
AnswerLine: 800-231-4654
averygraphics.
Uses:
Avery HP DOL 2000 Series clear
calendered vinyl films are flexible vinyl films
available in a gloss, luster, or matte finish.
HP DOL 2000 Series overlaminates have
been specifically designed as a protective
overlaminate film for digital or screen printed
graphics.
Finishes:
HP DOL 2060 – Gloss
HP DOL 2070 – Luster
HP DOL 2080 – Matte
Face: 3.1 mil (79 microns)
calendered
Adhesive: Permanent Acrylic
(clear)
Liner: 78# Bleached Kraft
Durability: Up to 3 years
Application
Surfaces:
Flat or simple curves
Features:
? Gloss, Luster, or Matte finish available
? Protects image from scratches
? Enhances color and depth of image
? Provides durability and outdoor performance
? Aids in application of printed graphic
? Excellent UV, temperature, humidity, and salt-spray resistance
? UL recognized slip resistance for floor graphics
? ASTM E84 Class 1 or A rating
?
Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Thermal Transfer
Screen Printing
Cold Overlaminating
Water based inkjet
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet
Common Applications:
Fleet (flat & simple curve only)
Vehicle (flat & simple curve only)
Marine/ Watercraft
Backlit Signs
Wall Murals
POP/ Tradeshow
Window Graphics
Outdoor Signage
Floor Graphics
Avery® HP DOL 2000 Series
Permanent Kraft
(formerly: DOL 2000 Series – 78# )
Revision: 6 Dated: 10/04/12
Product Data Sheet
Page 2 of 3
averygraphics.com
AnswerLine: 800-231-4654
averygraphics.
Physical Characteristics:
Property Value
Caliper, face 3.1 mil (79 µm)
Caliper, adhesive 1.0 mil (25 µm)
Dimensional
stability
<0.015”(0.4mm)
Tensile at Yield
Elongation
Gloss Hunter Gloss
@ 60
DOL 2060 Gloss – 70
DOL 2070 Luster – 40-50
DOL 2080 Matte – 8
Adhesion: 15 min. 4.75 lbs/in (831 N/m)
Flammability Self Extinguishing
Shelf-Life 1 year
Durability Vertical
Exposure
Up to 3 years
Min. Application
Temperature
40° F (4° C)
Service
Temperature
-40° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
FLOOR COATING AND FINISHING MATERIAL
AS TO SLIP RESISTANCE ONLY
UL Reference # 16GH
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either one year (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.
Avery® HP DOL 2000 Series
Permanent Kraft
(formerly: DOL 2000 Series – 78# )
Revision: 6 Dated: 10/04/12
Product Data Sheet
Page 3 of 3
averygraphics.com
AnswerLine: 800-231-4654
averygraphics.
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.

Avery DOL2080 MATTE PERM KR 3.1 mil Clear matte film on a kraft paper liner 41024 5401 5403 5404

 

Custom Finish – CTO A113397 DOL2080 MATTE PERM KR 54″
Custom Finish – FTO A113494 DOL2080 MATTE PERM KR 60″
Stock A004148 DOL2080 MATTE PERM KR 60X50 YDS 3IN
Stock A004134 DOL2080 MATTE PERM KR 54X50 YDS 3IN
Stock A002485 DOL2080 MATTE PERM KR 30X50 YDS 3IN
Stock A002485 DOL2080 MATTE PERM KR 30X50 YDS 3IN
Sample A010510 DOL2080 MATTE PERM KR 54X5

Additional information

Product Type

Size

, , ,

Thickness

Brands

Color

Surface Finish

Reviews

There are no reviews yet.

Be the first to review “Avery DOL2080 MATTE PERM KR 3.1 mil Clear matte film on a kraft paper liner”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations