Arlon Series 3220G, 3220L, 3220M




Arlon Series 3220G, 3220L

Arlon Series Series 3220G, 3220L
2 Mil Cast Gloss or Luster Cold Overlaminate.
• Crystal clear adhesive enhances clarity on printed graphics.
• Extremely conformable.
• Outdoor durability up to 7 years.
• Use with Arlon DPF6000XRP, DPF6000X, DPF8000, DPF4560GTX, and DPF4560MTX.

Series 3220 Overlaminates
Premium Cast Overlaminate Pressure-sensitive Film
Series 3220: Gloss, Luster, Satin, Matte, Metallic, and Pearlescent Finishes
Series 3220 overlaminates are constructed of 2-mil (50 micron) cast vinyl film with clear, permanent pressure-sensitive adhesive.
Designed to protect and prolong the life of printed images. Series 3220 extends the life of the graphics by 2 years. Series 3220
are rated for outdoor durability up to 7 years. This product is not designed to be used as an optically clear window film.
• Protective Overlaminate for DPF 6000XRP, DPF 6000X, DPF 6000RP, DPF 6000RP Clear and DPF 6500.
• Long-term signage, kiosks, POP displays, fleet and vehicle applications.
• Recommended dry time for printed images is 24-48 hours prior to laminating.
SURFACE FINISH Gloss Meter 60° Reflection 80-90% (Gloss, Metallic, Pearlescent)
55-85% (Luster)
20-30% (Satin)
1.5-10% (Matte)
THICKNESS Micrometer, Federal Bench Type 2-mil (50 micron)
TENSILE STRENGTH Tensile Tester with 2-in (51 mm) jaw separation; crosshead
speed of 12 in/min. (5.1 mm/s), web direction
≥ 4.5 lb/in width ≥ 0.8 kg/cm width
ELONGATION Instron Tensile Tester as above ≥ 150%
SHELF LIFE Free from excessive moisture, temperature, direct sunlight 2 years from factory shipment
On clean images 40°F to 100°F optimum 4.4°C to 38°C
On clean, dry substrate -40°F to 175°F -40°C to 79°C
HUMIDITY RESISTANCE Film applied to etched aluminum panels 24 hours prior
to testing. 100% relative humidity, 100°F (38°C) vfor 500
No Appreciable
USA: 2811 S. Harbor Blvd. Santa Ana, CA 92704 – Telephone: 800-854-0361 – Fax: 714-540-7190
Customer Service: Telephone: 800-232-7161 – Fax: 800-329-2756 – Technical Services: 877-275-6698
EUROPE: North Sea Building, Gevers Deynootweg 93, 4th Floor, 2586BK Den Haag, The Netherlands – Telephone: +31 (0) 70 354-4311 – Fax: +31 (0) 70 355-7721
INDIA: 4F1 Court Chambers, 35 – New Marines Lines, Mumbai 400 020 – Telephone: +91 99 6755-3895
Actual weathering durability depends on surface preparation, surface maintenance and exposure
conditions. Successful weather resistance is characterized by the retention of legibility.
Series 3220 will resist weathering best when applied to vertical or upper outboard angles.
Horizontal angles, such as hood and auto roof surfaces, will deteriorate more quickly than vertical.
This is due to increased exposure to sun and moisture, as well as continued high deposition of
dirt and atmospheric contaminants. Arlon does not recommend its film for horizontal or close
horizontal applications.
The following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon
products are based on tests believed to be reliable and within the accuracy of the equipment used
to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes
no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace
any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury,
loss or damage, direct or consequential, arising out of use or the inability to use the product.
Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing
or printing on the product. Before using, user shall determine the suitability of the product for
its intended use. User assumes all risk and liability of every nature in connection therewith. No
statements or recommendations other than those contained in the technical information published
by Arlon shall have force or effect unless contained in an agreement manually signed by the
officers of seller and manufacturer.

Additional information


, ,


Product Type



Surface Finish

, ,

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations