6 Mil Water-Resistant Self-Adhesive Polypropylene is a 6.5-mil, adhesive-backed polypropylene
film that will last up to eight months outdoors without lamination. The water-resistant, matte
ink receptive layer has a bright white abrasion resistant surface that produces bright vivid
colors. The strong, permanent solvent-based adhesive sticks to a wide range of substrates,
including rigid PVC, foamboard, and aluminum. Use 6 Mil Water-Resistant Self-Adhesive
Polypropylene as a cost-effective alternative to adhesive-backed vinyl.
Compatible with dye and pigment aqueous inks and HP latex inks.
Benefits Applications Customers
Bright White Point for extended
Solvent acrylic adhesive for
Polypropylene base for cost
effective but yet durable option
for mounted graphics
Built in Self-Adhesive; no need
for mount adhesives.
Short Term Outdoor Graphics
Point of Purchase
Large Format Printers
Material Type White polypropylene film
Gauge 6.6 mil
Adhesive Type Permanent solvent-based acrylic
Thickness 4 mil (without adhesive)
Finish Matte: Pressure-sensitive vinyl laminates can be applied to increase the fade and abrasion resistance of
the image. Before applying the laminate, allow the image to dry for 24 hours.
Whiteness 120 (CIE)
Gloss Level 18
Storage humidity Indoor, 1 yr @ 50-80 degrees
Color L>90, a=0, b*=3
Liner 2 mil poly
Ink Compatibility Compatible with all thermal and piezo inkjet printers using water-based dye and pigment-based inks
RIP & Printer Media Settings For the best and most consistent results, a profile should be created using an external color calibrator in
conjunction with your RIP and color matching software. However, if these tools are not available,
printers using dye ink should be set for the highest print quality and media selection should be
Photopaper. When using UV inks, the heavy weight coated option should be selected. Ink coverage
up to 300% is recommended.
Light Fastness The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment
where the print is displayed. Please consult with your ink manufacturer for light fastness data.
Water Resistance To obtain a high degree of water resistance, use only pigmented ink. Allow the print to dry for 24 hours
before exposing to moisture. Lamination is not required. Ink saturation over 350% can affect the waterresistant
properties and show ink bleed.
Optimal Service Environment 60°-86° F, 50% Relative Humidity.
Ideal Storage Conditions 70° F (21° C), 50% R.H. (a controlled environment is recommended); store in original packaging.
Shelf Life 1 year from the ship date when stored in proper conditions.
WRPSA2400-AC 24″ x 100 ft.
WRPSA3600-AC 36″ x 100 ft.
WRPSA4200-AC 42″ x 100 ft
WRPSA5000-AC 50″ x 100 ft.
WRPSA6000-AC 60″ x 100 ft.
Product Performance & Suitability: All of the descriptive information and recommendations should be used only as a guide. Furnishing such
information and recommendations shall in no event constitute a warranty of any kind. All purchasers shall independently determine the
suitability of the material for the purpose for which it is purchased. Sellers and manufacturers only obligation shall be to replace such quantity
of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct,
incidental or consequential (Including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or
recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.