Cart

3M Scotchcal Graphic Film with Comply Adhesive IJ35C-10 – Gloss /IJ35C-20- matte

$202.56$1,073.75

Description

3M Scotchcal Graphic Film with Comply Adhesive IJ35C-10/IJ35C-20

3M Scotchcal Graphic Film with Comply Adhesive IJ35C-10/IJ35C-20
3.2 Mil Calendered Gloss or Matte White ScotchcalTM Graphic Film with ComplyTM Adhesive.
• Up to 5 year expected performance life.
• Grey opaque, permanent ComplyTM adhesive for fast, easy bubble-free installations.
• Polycoated layflat paper liner.
• Great for interior or exterior signage, architectural applications, trade show graphics, and POP.
• 3M™ suggests laminating with 8508 or 8509.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex, Screen Print.

 

Product Description
A. Product Features  3.2-mil vinyl film
 Available in gloss and matte finishes
 Pressure-sensitive adhesive with Comply™ Adhesive for fast, easy bubble-free installa­
tions
 Permanent
B. Suggested Uses The user is responsible for determining the product’s suitability for the intended application.
This product should be used on a test-and-approve basis.
 Short to long-term, indoor and outdoor promotional graphics
 Signs, trade show and point-of-purchase displays
 Exhibits and architectural applications
C. Expected Performance Life Expected Performance Life as a good faith estimate of how long the product may perform
satisfactorily based on 3M testing. Note, there is no warranty associated with this estimate.
5 years in a vertical orientation with typical usage
Note: 3M Product and Instruction Bulletins provide practical recommendations for using
this product in a way that maximizes performance, but using other 3M products or
procedures with this film does not change the terms of the warranty.
D. Wall Graphics Two-mil cast films are typically the best choice for indoor smooth surface wall graphics,
although this film may be suitable for shorter term applications. In either case, the user is
responsible for determining the product’s suitability, including adhesion and, if required,
removal characteristics. Due to the wide variability of smooth indoor walls, neither finished
graphics nor removal is warranted, even for removable or changeable films. Instruction
Bulletin 5.37 provides comprehensive information for the most successful wall graphics film
selection and application.
2. Characteristics All values are typical for unprocessed film and are not for use in specifications. Contact your
3M representative for a custom specification.
A. Physical Characteristics Characteristic Value
Material Vinyl
Color White opaque
Gloss Gloss IJ35C-10
Matte IJ35C-20
Film thickness Without adhesive: 3.2 mil (0.081 mm)
With adhesive: 4.0 mil (0.102 mm)
Adhesive type Pressure-sensitive
Adhesive color Gray
Liner Polycoated paper
Flammability Call 1-800-328-3908 for information.
Continued on next page…Product Bulletin PIJ35C – 2
B. Application Characteristics Characteristic Value
Finished graphic
application
recommendations
Surface type:
Smooth, flat and simple curved surfaces
Substrate type:
Metal, rigid plastic and painted substrates
Application temperature: air and substrate
40 to 100F (4 to 38C)
Application method Dry
Finished graphic
exposure temperature
-59 to +192F (-50 to +90C )
Graphic removal Permanent
3. Definitions
A. Exposure Types U.S. Vertical
Exposure
face of graphic The face of the graphic is +/- 10 from vertical.
4. Warranty Information
A. Warranty Coverage
Overview
This film is covered by the 3M Basic Product Warranty. It has been tested and is believed to
be a good product when used as recommended in this Product Bulletin. However, there is
no assurance or guarantee for the following:
 printability.
 visual appearance.
 fitness for use.
 removability or changeability.
 damage to the substrate.
 durability.
B. 3M Basic Product Warranty The following is made in lieu of all other express or implied warranties, including any im­
plied warranty of merchantability or fitness for a particular purpose or implied warranty
arising out of a course of dealing, custom or usage of trade.
This 3M Product is warranted to be free of defects in materials and manufacture at the time
of shipment and to meet the specifications stated in this Product Bulletin and as further set
forth in the 3M Commercial Graphics Warranty Brochure.
C. Limited Remedy 3M will replace or refund the price of any 3M materials that do not meet this warranty with­
in the specified time periods. These remedies are exclusive.
D. Additional Limitations See the 3M Commercial Graphics Warranty Brochure at 3Mgraphics.com, which gives the
terms, additional limitations of the warranty, if any, and limitations of liability.
5. Limitation of Liability Except where prohibited by law, 3M SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE
TO PURCHASER OR USER FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LABOR, NON-3M
MATERIAL CHARGES, LOSS OF PROFITS, REVENUE, BUSINESS, OPPORTUNITY, OR
GOODWILL) RESULTING FROM OR IN ANY WAY RELATED TO SELLER’S PRODUCTS OR
SERVICES. This limitation of liability applies regardless of the legal or equitable theory under
which such losses or damages are sought including breach of contract, breach of warranty,
negligence, strict liability, or any other legal or equitable theory.Product Bulletin PIJ35C – 3
6. Graphic Manufacturing
A. All Printing Methods This film has been optimized to perform well with a variety of inkjet printers and inks as well
as screen printing inks and processes. It is the graphic manufacturer’s responsibility to
determine the film’s suitability for use with their printers and inks.
To maximize the film performance:
 Use graphic protection. 3M™ Scotchcal™ Gloss Overlaminate 8508 or Luster
Overlaminate 8509 are cost-effective options for use with 3M’s intermediate graphic
films.
 Thoroughly dry the ink and film or properly cure the ink before applying graphic protec­
tion, and before storing or installing a graphic.
 Always use the dry application method.
B. Inkjet Printing Only  Be aware that using sheeting film on a flat-bed inkjet printer may produce printing de­
fects.
 The typical maximum ink limit is 250%.
 If you are storing sheeted and stacked finished graphics for an extended period of time,
leave an unprinted margin (about 1/4 inch) to allow for possible shrinkage before
trimming the graphic.
7. Shelf Life, Storage and Shipping
A. Shelf Life Total shelf life: 2 years from the date of manufacture on the original box.
If you do process the film, do so within 1 year and apply within 1 year of processing.
(Example: If you process at month 6, apply by month 18.)
If you do not process the film, apply it within 2 years.
B. Storage Conditions  90F (32C) maximum
 Out of direct sunlight
 Clean, dry area
 Original container
 Bring the film to print room temperature before using
C. Shipping Finished Graphics Flat (may be separated by paper), or rolled printed side out on 5 inch (13 cm) or larger core.
This helps prevent the liner and, if used, the application tape from popping off.
8. Health and Safety
! CAUTION When handling any chemical products, read the manufacturers’ container labels and the
Material Safety Data Sheets (MSDS) for important health, safety and environmental inform­
ation. To obtain MSDS sheets for 3M products go to 3M.com/MSDS, or by mail or in case of
an emergency, call 1-800-364-3577 or 1-651-737-6501.
When using any equipment, always follow the manufacturers’ instructions for safe
operation.

IJ35C-20 Matte White, Miscellaneous Roll Sizes 3M ID  75347252829

IJ35C-10 White, Miscellaneous Sheet Sizes3M ID  75347204408

IJ35C-20 Matte White, Miscellaneous Sheet Sizes 3M ID  75347204416

IJ35C-10 White, 30 in x 50 yd 3M ID  75347205306    UPC#  00051128817483

IJ35C-20 Matte White, 30 in x 50 yd 3M ID  75347205397    UPC#  00051128817704

IJ35C-20 Matte White, Sample Roll, 54 in x 5 yd 3M ID  75347189922    UPC#  00051128815298

IJ35C-10 White, Sample Roll, 54 in x 5 yd 3M ID  75347189914    UPC#  0005112881528

1IJ35C-20 Matte White, 54 in x 50 yd 3M ID  75347189724    UPC#  00051128814871

IJ35C-10 White, 54 in x 50 yd 3M ID  75347189708    UPC#  00051128814857

IJ35C-20 Matte White, 6 inch core, 54 in x 100 yd 3M ID  75347233290    UPC#  00051128926222

IJ35C-10 White, 54 in x 100 yd 3M ID  75347189716    UPC#  00051128814864

IJ35C-10 White, 6 inch core, 54 in x 100 yd 3M ID  75347233282    UPC#  00051128926215

IJ35C-20 Matte White, 54 in x 200 yd3M ID  75347204770    UPC#  00051128817773
IJ35C-20 Matte White, 60.5 in x 50 yd 3M ID  75347205405    UPC#  00051128817711

IJ35C-10 White, 60.5 in x 50 yd 3M ID  75347205314    UPC#  00051128916087

IJ35C-20 Matte White, 60.5 in x 200 yd3M ID  75347234983    UPC#  00051128917046

Additional information

Size

, , , , , , ,

Brands

Product Type

, ,

Adhesive Type

Thickness

Print compatibility

, , , ,

Surface Finish

,

Color

Reviews

There are no reviews yet.

Be the first to review “3M Scotchcal Graphic Film with Comply Adhesive IJ35C-10 – Gloss /IJ35C-20- matte”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations