Cart

3M™ Controltac™ Graphic Film with Comply™ v3 Adhesive IJ180Cv3-10 White

$192.00$4,053.50

Clear
SKU: 3M™ Controltac™ Graphic Film with Comply™ v3 Adhesive IJ180Cv3-10 White Categories:

Description

3M™ Controltac™ Graphic Film with Comply™ v3 Adhesive IJ180Cv3-10 White

3M™ Controltac™ Graphic Film with Comply™ v3 Adhesive IJ180Cv3-10 White

3M™ Controltac™ Graphic Film IJ180C-10 White
2 Mil Cast Semi-Gloss Controltac™ Graphic Film with Removable Adhesive.
• 10 year outdoor durability.
• Grey opaque removable adhesive with 5 year removability.
• Polyethylene coated paper liner.
• Great for indoor and outdoor signs and banners, vehicle wraps, watercraft graphics.
• 3M™ suggests laminating with 8518, 8519 or 8520.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex

Scotchcal

Description
Controltac™ Graphic Film
 IJ180-10, RG180-10*
 With Comply™ Adhesive IJ180C-10, FN180C-10, RG180C-10*
 With Comply™ v3 Adhesive IJ180Cv3-10, FN180Cv3-10
For Solvent, UV and Latex Inkjet Printing
1. Product Description
A. Product Features
 2‐mil white, vinyl film with a luster finish
 Excellent hiding power
 Pressure-activated adhesive for easy sliding, tacking, snap up and repositioning
 Flexible; conforms to compound curves, corrugations and rivets
– Stretch selected finished graphic constructions up to 130% (i.e., a 10 inch film
piece can stretch to 13 inches) without primer or relief cuts and maintain lift
resistance; see details and exceptions in Section 8.
 Films IJ180C-10 and IJ180Cv3-10 have Comply™ Adhesive air release channels for
fast, easy, bubble-free installations
 Film IJ180Cv3-10 air release channels are non-visible and have improved air release
 Removable with heat and/or chemicals
* Film RG180C-10 are available for purchase and use with only a 3M Basic Product
Warranty on a customer test and approve basis.
B. Recommended Types of
Graphics and End Uses
When constructed and used as described in this Bulletin, these types of graphics and end
uses may be warranted by the 3M™ MCS™ Warranty or the 3M Performance Guarantee.
Please read the entire Bulletin for details.
 Indoor and outdoor graphics and signs, including point-of-purchase and displays
 Commercial vehicles, straight trucks, semi-trucks and semi-trailers; emblems or
striping
 Bus graphics
 Personal vehicle graphics and wraps
 Non-vertical and horizontal vehicle wraps when protected with 3M overlaminates 8528
or 8548G
 Watercraft graphics (above the static water line only)
 Small format original equipment manufacturer’s (OEM) decorative and identification
graphics, cautionary and safety labeling
C. Performance Overview 3M tests the performance of both individual products and finished graphic constructions.
This table shows the best performance expected from this product without a Warranty
Period and with a Warranty Period.
For detailed graphic construction and application options along with specific Warranty
Periods, please see the Warranty Information, Section 5.
Expected Performance Life. This is the estimated period of time the product should perform satisfactorily.
Unprinted film with no graphic protection, applied to a flat vertical outdoor surface. 10 years
Unwarranted Period
3M™ MCS™ Warranty. This is the maximum period of time 3M will warrant the finished graphic performance.
Printed film with the best 3M ink and graphic protection option, applied to a flat, vertical, vehicle type
surface.
7 years
Warranty Period
3M Performance Guarantee. This is the maximum period of time 3M will warrant the performance of the 3M materials used.
Printed film with the best ink and graphic protection option, applied to a flat, vertical, vehicle surface. 4 years
Warranty PeriodProduct Bulletin PIJ180/180C – 2
D. Limitations of End Uses This 3M product is not designed or recommended for the following uses. Please contact us
to discuss other options.
(1) Unsuitable End Uses
for This Film
 Graphics applied to:
– stainless steel (we recommend using 3M™ Controltac™ Graphic Film IJ181
instead)
– non-3M films (see Removal Warranty)
– watercraft when the graphic is below the static water line
– watercraft graphics that are not edge sealed
– painted substrates with poor paint to substrate, or paint-to-paint bond
– substrate surfaces that are not clean and smooth (little or no variation in texture)
 For film with Comply v3 adhesive only: Do not use prespacing tape in cut and
weeded applications where the tape must adhere to the exposed liner.
 Film without graphic protection when they are:
– printed vehicle graphics
– watercraft graphics
– exposed to abrasive conditions, harsh cleaners or chemicals
– horizontally-exposed outdoor applications
 Graphic removal from:
– applications with poor paint-to-substrate adhesion
– existing graphics that must remain intact; damage may occur during removal of film
– watercraft
– outdoor, horizontal applications (except graphics using overlaminate 8528 or
8548G as described in this Bulletin)
 Graphics subjected to gasoline vapors or spills, including those at or on gas pumps,
automobile fuel-tank ports, watercraft or top-feeding, petroleum tankers
(2) Wall Graphics Two-mil cast films are typically the best choice for indoor smooth surface wall graphics.
However, the user is responsible for determining the product’s suitability, including adhe­
sion and, if required, removal characteristics. Due to the wide variability of smooth indoor
walls, neither finished graphics nor removal is warranted, even for removable or change­
able films. Instruction Bulletin 5.37 provides comprehensive information for the most suc­
cessful wall graphics film selection and application.
(3) Important Information
About Bus Applications
Film used on buses must not be applied so as to restrict the safe use of emergency window
exits. See the most current version of Instruction Bulletin 5.4 for details.
2. Compatible Products This section provides a list of products that are approved by 3M for use with the base film
covered in this Bulletin, and used for the creation of a graphic that is covered by the 3M™
MCS™ Warranty or 3M Performance Guarantee. Refer to the Product and Instruction
Bulletins listed in 3M Related Literature at the end of this Bulletin for more information
about the compatible products.
A. Inkjet Inks and Printers for
3M™ MCS™ Warranty
(1) Solvent Inkjet Inks
� Exposure conditions
Warranted Durability
Some graphics have a graphics warranty, while others are
warranted for product only. For specific warranted
durability, refer to the Product Bulletin for the film or
sheeting you are using. See 3M Related Literature at the

3M ID 75347185979
UPC 00051128805817
3M ID 75347186019
UPC 00051128805855
3M ID 75347179709
UPC 00051128806043
3M ID 75347235253
UPC 00051128924594
3M ID 75347185854
UPC 00051128806081
3M ID 75347189781
UPC 00051128814901
3M ID 75347186027
UPC 00051128805862
3M ID 75347186035
UPC 00051128805879
3M ID 75347186282
UPC 00051128806807
3M ID 75347185920
UPC 00051128806173
3M ID 75347185961
UPC 00051128805800
3M ID 75347185904
UPC 00051128806159
3M ID 75347185938
UPC 00051128805787
3M ID 75347186001
UPC 00051128805848
3M ID 75347186175
UPC 00051128806708
3M ID 75347185888
UPC 00051128806111
3M ID 75347235303
UPC 00051128925607
3M ID 75347185912
UPC 00051128806166
3M ID 75347185953
UPC 00051128805770
3M ID 75347185896
UPC 00051128806142
3M ID 75347185995
UPC 00051128805831

 

 

 

 

Additional information

Size

, , , , , , , , , , , , , , , , , , , ,

Brands

Product Type

Color

Thickness

Surface Finish

Laminator Type

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations