Cart

3M 4032 Double Coated Urethane Foam Tape

$83.00$1,425.00

Clear
SKU: 3M 4032 Double Coated Urethane Foam Tape Categories:

Description

3M 4032 Double Coated Urethane Foam Tape

3M 4032 Double Coated Urethane Foam Tape

3M™ Double Coated Urethane Foam Tape 4032 is a thick, double-coated, open-cell urethane foam tape with a paper liner.
High shear strength
Durable on interior mounting applications
Clean appearance

Brochure

Data Sheet

3
Double Coated Urethane Foam Tapes
4004 • 4008 • 4016 • 4026
4032 • 4052 • 4056 • 4085
Technical Data April, 2009
Product Description 3M™ Double Coated Urethane Foam Tapes are conformable foams that offer high
shear strength and are available with either a high temperature holding acrylic
adhesive system or a rubber adhesive system for bonding to various types of surfaces
for mounting, joining and holding.
Products
3M™ Double Coated Urethane Foam Tape 4004 1/4 in. (6.4 mm) thick
3M™ Double Coated Urethane Foam Tape 4008 1/8 in. (3.2 mm) thick
3M™ Double Coated Urethane Foam Tape 4016 1/16 in. (1.6 mm) thick
3M™ Double Coated Urethane Foam Tape 4026 1/16 in. (1.6 mm) thick
3M™ Double Coated Urethane Foam Tape 4032 1/32 in. (0.8 mm) thick
3M™ Double Coated Black Urethane Foam Tape 4052 1/32 in. (0.8 mm) thick
3M™ Double Coated Black Urethane Foam Tape 4056 1/16 in. (1.6 mm) thick
3M™ Double Coated Urethane Foam Tape 4085 0.045 in. (1.1 mm) thick
Note: The user is responsible for determining whether the tape is fit for a particular
purpose and suitable for user’s method of application.
*3M™ Adhesive 100 is a firm acrylic pressure sensitive adhesive system. It features high ultimate bond strength, very good high temperature
and solvent resistance and very high shear holding power. Bond strength increases substantially with natural aging.
3M™ Double Coated Urethane Foam Tapes
4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085
Units 4004 4008 4016 4026
Adhesive Type:* 100 100 100 100
Adhesive Carrier: Polyurethane Foam Polyurethane Foam Polyurethane Foam Polyurethane Foam
Thickness: Nominal inch (mm) 0.250 (6.4) 0.125 (3.2) 0.0625 (1.6) 0.0625 (1.6)
Thickness: Tolerance: inch 0.215-0.285 0.110-0.150 0.045-0.080 0.045-0.080
(mm) (5.46-7.24) (2.79-3.81) (1.142-2.03) (1.142-2.03)
Color: Natural Natural Natural Natural
Release Liner: inch (mm) 0.003 (0.08) 0.003 (0.08) 0.003 (0.08) 0.003 (0.08)
Liner Color: Green Plaid Green Plaid Green Plaid Green Plaid
Approximate Density: lb/ft3 12 15 11 18
(Foam Only) (kg/m3
) (190) (240) (175) (290)
Standard Length: yard (meter) 18 (16.5) 36 (32.9) 36 (32.9) 36 (32.9)
Maximum Length: yard (meter) 25 (23) 50 (45.7) 100 (91) 100 (91)
Available Width: inch (mm) 46 (1168) 46 (1168) 46 (1168) 46 (1168)
Normal Slitting Tolerance: inch (mm) ± 1/32 (± 0.8) ± 1/32 (± 0.8) ± 1/32 (± 0.8) ± 1/32 (± 0.8)
Normal Tensile: psi (kPa) 12 (85) 25 (170) 50 (345) 40 (275)
(“T” Block)
1 in2 (6.45 cm2
)
Jaw Speed 2 in/min
(50 mm/min)
Static Shear:
72°F (22°C) gms 1000 1000 1500 2000
120°F (49°C) 500 500 1000 1000
150°F (66°C) 500 500 750 1000
200°F (93°C) 250 250 750 750
Tensile Strength: psi (kPa) 90 (620) 160 (1100) 140 (965) 180 (1240)
Elongation: % 90 90 100 100
Temperature Resistance:
Short Term (Minutes, Hours) °F (°C) 380 (193) 380 (193) 380 (193) 380 (193)
Long Term (Days, Weeks) °F (°C) 220 (104) 220 (104) 220 (104) 220 (104)
Solvent Resistance: No apparent degradation when exposed to splash
tests of most hydrocarbon solvents.
UV Resistance: No apparent degradation when exposed to 7 days in U.V. chamber.
Cold Flex at -20°F (-30°C): No cracking when flexed around a 1/4 in. (6.4 mm mandrel).
Thermal Conductivity: BTU/hr/°F/ft2
/ft 0.036 0.036 0.036 0.036
(watt/metre Kelvin) (0.062) (0.062) (0.062) (0.062)
Dielectric Strength: volts/mil 200-300 200-300 200-300 200-300
(volts/0.025 mm) (200-300) (200-300) (200-300) (200-300)
Typical Physical Properties Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
3M™ Double Coated Urethane Foam Tape
Measured at various
temperatures and
gram loadings.
(1/2 sq. in. overlap).
Will hold listed
weight for 100 hours.
– 2 –
*3M™ Adhesive 100 is a firm acrylic pressure sensitive adhesive system. It features high ultimate bond strength, very good high temperature
and solvent resistance and very high shear holding power. Bond strength increases substantially with natural aging.
3M™ Adhesive 740 is a medium-firm rubber-resin pressure sensitive adhesive system. It features good holding power and adhesion to a
wide variety of surfaces including many low surface energy plastics such as polyethylene and polypropylene.
3M™ Double Coated Urethane Foam Tapes
4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085
Units 4032 4052 4056 4085
Adhesive Type:* 100 100 100 740
Adhesive Carrier: Polyurethane Foam Polyurethane Foam Polyurethane Foam Polyurethane Foam
Thickness: Nominal inch (mm) 0.031 (0.8) 0.031 (0.8) 0.0625 (1.6) 0.045 (1.2)
Thickness: Tolerance: inch 0.025-0.040 0.025-0.040 0.045-0.080 0.039-0.054
(mm) (0.64-1.02) (0.64-1.02) (1.142-2.03) (1.00-1.45)
Color: Natural Black Black Natural
Release Liner: inch (mm) 0.003 (0.08) 0.003 (0.08) 0.003 (0.08) 0.003 (0.08)
Liner Color: Green Plaid Green Plaid Green Plaid Tan
Approximate Density: lb/ft3 20 14 11 22
(Foam Only) (kg/m3
) (320) (225) (175) (352)
Standard Length: yard (meter) 72 (65.8) 72 (65.8) 36 (32.9) 72 (65.8)
Maximum Length: yard (meter) 175 (160) 175 (160) 100 (91) 100 (91)
Available Width: inch (mm) 46 (1168) 46 (1168) 46 (1168) 46 (1168)
Normal Slitting Tolerance: inch (mm) ± 1/32 (± 0.8) ± 1/32 (± 0.8) ± 1/32 (± 0.8) ± 1/32 (± 0.8)
Normal Tensile: psi (kPa) 60 (414) 75 (515) 50 (345) 45 (310)
(“T” Block)
1 in2 (6.45 cm2
)
Jaw Speed 2 in/min
(50 mm/min)
Static Shear:
72°F (22°C) gms 2000 1500 1500 1000
120°F (49°C) 1500 750 1000 250
150°F (66°C) 1000 750 750 —
200°F (93°C) 1050 750 750 —
Tensile Strength: psi (kPa) 240 (1655) 225 (1550) 140 (965) 140 (965)
Elongation: % 90 110 100 100
Temperature Resistance:
Short Term (Minutes, Hours) °F (°C) 380 (193) 380 (193) 380 (193) 200 (93)
Long Term (Days, Weeks) °F (°C) 220 (104) 220 (104) 220 (104) 125 (152)
Solvent Resistance: No apparent degradation when exposed to splash
tests of most hydrocarbon solvents.
UV Resistance: No apparent degradation when exposed to 7 days in U.V. chamber.
Cold Flex at -20°F (-30°C): No cracking when flexed around a 1/4 in. (6.4 mm mandrel).
Thermal Conductivity: BTU/hr/°F/ft2
/ft 0.036 0.036 0.036 0.036
(watt/metre Kelvin) (0.062) (0.062) (0.062) (0.062)
Dielectric Strength: volts/mil 200-300 200-300 200-300 200-300
(volts/0.025 mm) (200-300) (200-300) (200-300) (200-300)
Typical Physical Properties Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
3M™ Double Coated Urethane Foam Tape
Measured at various
temperatures and
gram loadings.
(1/2 sq. in. overlap).
Will hold listed
weight for 100 hours.
– 3 –
– 4 –
Application Techniques • Bond strength is dependent upon the amount of adhesive-to-surface contact
developed. Firm application pressure helps develop better adhesive contact and
improve bond strength.
• To obtain optimum adhesion, the bonding surfaces must be clean, dry and well
unified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing
alcohol) or heptane.
• Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
*Note: Be sure to follow the manufacturer’s precautions and directions for use when
using solvents.
Application Ideas The urethane foam tapes are generally ideal for interior applications or for exterior
applications where the tape will be protected from the environment. The urethane
foam is open cell.
3M™ Double Coated Urethane Foam Tape 4004 – Mount interior signs and nameplates
3M™ Double Coated Urethane Foam Tape 4008 – Bond acoustic panels to walls
3M™ Double Coated Urethane Foam Tape 4016 – Mount interior signs and nameplates
3M™ Double Coated Urethane Foam Tape 4026 – Mount air fresheners and soap dispensers
3M™ Double Coated Urethane Foam Tape 4032 – Attach wire clips to various surfaces
3M™ Double Coated Urethane Foam Tape 4052 – Bond window to microwave oven doors
Mount electrical channel to wall surfaces
3M™ Double Coated Urethane Foam Tape 4056 – Mount wall corner protectors
3M™ Double Coated Urethane Foam Tape 4085 – Attach wire clips
Attach air fresheners
3M™ Double Coated Urethane Foam Tapes
4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085
Features • The natural colored urethane foam tape products vary in color from white to light
yellow. The color will change to light yellow upon exposure to sunlight (ultraviolet
radiation). This color change is normal and does not affect tape performance.
• 3M™ Double Coated Urethane Foam Tape 4026 is available in roll form and diecut
pieces. Die-cut pieces of 3M tape 4026 is available in 3/4″ or 1″ squares, either
individual pieces double linered with an extended liner on one side or in pads of 48
squares.
• 3M™ Double Coated Urethane Foam Tape 4085 combines conformability with
high immediate adhesion to most plastics including ABS, polycarbonate, acrylic,
polyethylene and polypropylene as well as metal and paint. 3M tape 4085 tears
easily which makes it ideal for hand application.
– 5 –
3M™ Double Coated Urethane Foam Tapes
4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085
MSDS: 3M has not prepared MSDSs for these products which are not subject to the MSDS requirements
of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions
for use, these products should not present a health and safety hazard. However, use or processing of the
products in a manner not in accordance with the directions for use may affect their performance and
present potential health and safety hazards.
TSCA: These products are defined as articles under the Toxic Substances Control Act and therefore, are
exempt from inventory listing requirements.
Certification/
Recognition
Storage Store in original cartons at 70°F (21°C) and 50% relative humidity.
Shelf Life To obtain best performance, use these products within 24 months from date of
manufacture except 3M™ Double Coated Urethane Foam Tape 4085 which is
18 months from date of manufacture.
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Technical Information
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
70006030756 00021200048678 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 1 1/4 in x 72 yd 1/32 in, 6 per case Bulk Off-White 72 Linear Yard 1.25 Inch
70002480245 00021200033643 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 5/8 in x 72 yd 1/32 in, 15 per case Bulk Off-White 72 Linear Yard 0.62 Inch
70002480187 00021200033582 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 3/8 in x 72 yd 1/32 in, 24 per case Bulk Off-White 72 Linear Yard 0.37 Inch
70006030772 00021200048692 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 2 in x 72 yd 1/32 in, 6 per case Bulk Off-White 72 Linear Yard 2 Inch
70006076114 00021200064562 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 1/2 in x 72 yd 1/32 in, 18 per case Bulk Off-White 72 Linear Yard 0.5 Inch
70002480294 00021200033681 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 4 in x 72 yd 1/32 in, 2 per case Bulk – NOT FOR RETAIL/CONSUMER USE Off-White 72 Linear Yard 4 Inch
70002480229 00021200033629 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 1-1/2 in x 72 yd 1/32 in, 6 per case Bulk Off-White 72 Linear Yard 1.5 Inch
70002480179 00021200033575 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 1/4 in x 72 yd 1/32 in, 36 per case Bulk Off-White 72 Linear Yard 0.25 Inch
70016053475 00051115118876 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 24 in x 72 yd, 1 per case Bulk Off-White 72 Linear Yard 24 Inch
70006215076 00021200564147 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 12 in x 72 yd 1/32 in, 1 per case Off-White 72 Linear Yard 12 Inch
70006076130 00021200064586 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 1 in x 72 yd 1/32 in, 9 per case Bulk Off-White 72 Linear Yard 1 Inch
70006076122 00021200064579 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 3/4 in x 72 yd 1/32 in, 12 per case Bulk Off-White 72 Linear Yard 0.75 Inch
70006061025 00021200156694 3M™ Double Coated Urethane Foam Tape 4032 Off-White, 9 in x 72 yd 1/32 in, 1 per case Bulk Off-White 72 Linear Yard 9 Inch

Additional information

Product Type

Size

, , , , , , , , , ,

Thickness

Quantity

, , , , , , , ,

Brands

Ink Type
Color
Surface Finish

Media Type
perforation pattern
Weight

Reviews

There are no reviews yet.

Be the first to review “3M 4032 Double Coated Urethane Foam Tape”

Your email address will not be published.

BCI Offers FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations