3M 180C

Description

3M 180C

3M 180C
Controltac™ Graphic Film with Comply™ Adhesive.
• 2 mil cast.
• 7 year durability.
• Slideable and repositionable pressure activated adhesive with air release.
• Great for fleet graphics, emblems, bus graphics, or striping.
• Good for surfaces with and without rivets.
• Do not wet apply.

http://bluemedia.com/corporate/wp-content/uploads/2010/11/3M-Vehicle-Wrap-Warranty.pdf+

Description
Advantages

Same as our standard 3M Controltac Plus Graphic
Film 180, except 180C has the new Comply
Performance feature for easier, high quality
installations

Screen printable

Wide color selection

Lifetime warranty for trailers;
up to 7 years for other applications

Suitable for large exterior and interior graphics

Easy to temporarily position during application

For flat and corrugated surfaces with and without rivets

Removable adhesive, with heat or a chemical system

Wide application and removal temperature range
Application and End Uses
3M Controltac Plus Graphic Film with Comply
Performance Series 180C is intended for making
removable, durable graphics when used with the listed
Compatible Products in the following applications. These
applications are warranted by the 3M MCS Warranty.

Interior and exterior graphics and signs

Commercial vehicle and fleet graphics, emblems or
striping

Bus graphics
Limitations of End Uses
We do not normally warrant other applications, but please
contact us to discuss your needs or let us suggest other 3M
products.
Specifically, we do not warrant this film for the following:

Graphics applied to:
– Stainless steel.
– Non-3M films (also see Removal on page 8).
– Substrates that do not have a clean, smooth
surface.

Graphic removal from:
– Applications with poor paint-to-substrate adhesion.
– Existing graphics that must remain intact. Damage
may occur during removal of film series 180C.