16.4′ Large Feather Flag – X-Base Single-Sided Graphic Package
This Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 16.4 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
- X Base
- Printed Banner (Single-Sided)
- Nylon Bag
- Travel bag dimensions: 48″ x 7.5″ x 1.5″
- Height: 16.4 ft.
- Base Pole Diameter: 1/16″ (1.0625″)
- Wind Speed Rating: 18-23mph
- Warranty: One (1) year warranty on hardware and graphics
<iframe width=”560″ height=”315″ src=”https://www.youtube.com/embed/aWSytXhgrhA” frameborder=”0″ allow=”accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture” allowfullscreen></iframe>