Developed specifically for solvent, latex and UV-curable printers ,10 Mil Solvent Printable
Polycarbonate is the perfect solution for trade show graphics, point-of-purchase displays, backlit
displays, floor advertising, name plates, control panels, and more. This 10 mil reverse-print
material has a textured non-glare finish thats scratch resistant for a highly durable, easy-toproduce,
economical, and customer-pleasing printed product.
Benefits Applications Customers
High color brilliance and high
Textured surface reduces glare
Large format print services
Design firm/Ad agency
In-house print departments
Material Type Textured polycarbonate film
Gauge 10 mil
Core Size 3 ID core
Printer/Ink Compatibility Compatible with most low-solvent, solvent, and UV curable printers. Not recommended for HP or
Seiko printers due to the inability to register clear films.
Finishing/Post Processing Solvent inks have excellent water-resistance when used in conjunction with this film. If the film is
laminated the print must dry for 24 hours to ensure that the solvents are gone from the print.
Insufficient dry time can cause color shift and affect the bond strength of the laminate adhesive
RIP & Printer Media
Optimized printer settings will vary from printer manufacturers. To optimize print quality, 720 dpi
will offer the best results. Recommended heater settings of 122° F (50°C) for both pre and post
heaters. These recommendations have been found to be a good place to start
For printing: 59-77° F, 20-80% relative humidity.
For end use: -40 to 176° F
Ideal Storage Conditions 50-80°F, 35-65% R.H.; a controlled environment is recommended; store in original packaging.
Shelf Life Greater than one year from ship date when stored in proper conditions.
UKROMAXL3660 36″ x 60 ft.
UKROMAXL5060 50″ x 60 ft.
Product Performance & Suitability: All of the descriptive information and recommendations should be used only as a guide. Furnishing such
information and recommendations shall in no event constitute a warranty of any kind. All purchasers shall independently determine the
suitability of the material for the purpose for which it is purchased. Sellers and manufacturers only obligation shall be to replace such quantity
of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct,
incidental or consequential (Including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or
recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.