Description
ORAJET 3850
ORAJET 3850
3 Mil Calendered Translucent White Inkjet Vinyl.
• 7 year outdoor durability.
• Clear solvent based, permanent adhesive.
• 90lb P.E. coated silicone paper liner.
• Designed for backlit and internally illuminated long term outdoor signs.
• ORACAL suggests laminating with Oraguard 240 or 290.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex.
http://www.folii-adezive.ro/documente/produse/3850.pdf
Description
3-mil, translucent calendered PVC film with a white semi-gloss surface
Release Liner
90# PE-coated silicone paper
Adhesive
Clear, solvent-based, permanent adhesive
Applications
Long-term use on rigid substrates in backlit indoor and outdoor applications
Technical Data
Thickness (without liner and adhesive) 3 mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.008”
Temperature Resistance Adhered to aluminum, -58°F to +176°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class “A”
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 4.1 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 19 MPa
Across: Min. 19 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 130%
Across: Min. 150%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces)
7 years (unprinted)
Minimum Application Temperature 46°F
Available Lengths
Available Widths (inches)
150’ (50-yard)
30, 54, 60
30’ (10-yard)
54
750’ (250-yard)
60
Recommended Laminates ORAGUARD® Series 215, 240, 290, 290GF, 293, 297GF
Print Compatibility Latex, Solvent, Eco-Solvent, UV Curable
ORACAL® recommends that printed film be allowed to dry for at least 24 hours at 70°F (48-72 preferred) before applying a laminate.
Attention
Recycling Recommendation: Waste class similar to household waste, is to be recycled according to the local regulations.
Surfaces to which the material will be applied must be cleaned thoroughly of dust, grease or any contaminants. Freshly lacquered or painted
surfaces should be allowed to stand for at least three weeks after complete curing. The compatibility of selected lacquers and paints should be
tested by the end-user prior to use.
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of
information and is given without any guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications,
customers should independently determine the suitability of this material for their specific purpose, prior to use.
Reviews
There are no reviews yet.