ORACAL 383 Ultra Leaf

Description

ORACAL 383 Ultra Leaf

ORACAL 383 Ultra Leaf
• Hammered leaf pattern with a 3D visual texture
• Smooth printable surface for thermal printing
• Not solvent printable
• Permanent adhesive
• 3.5 mil cast film
• 5 year outdoor durability
• Recommended for flat and curved surfaces

http://www.orafol.com/tl_files/content/downloads/technicaldatasheets/europe/en/oracal/oracal-383-ultraleaf-cast.pdf

Description
Self-adhesive polymeric cast film with a three dimensional visionary texture. Ultraleaf Cast is featured by a smooth
printable surface and durable dimensional stability. Using a permanent acrylic adhesive excellent adhesion to a variety
of surfaces is realized for long-term outdoor application. Available in chrome and glossy gold.
Release paper
Special silicone coated paper on one side, 135 g/m²
Adhesive
Solvent polyacrylate, permanent
Area of use
Specially developed as unique pressure sensitive film for lettering, marking and decoration of vehicles, windows and
signs with highest requirements for long outdoor durability.
Thickness* 85 micron
Dimensional stability adhered to steel, shrinkage in cross and length direction 0.25
mm max.
Temperature resistance adhered to aluminium, -65°F to +160°F (-54°C to +71°C)
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
16 N/25 mm
Tensile strength (DIN EN ISO 527)
along min. 17 MPa
across min. 17 MPa
Elongation at break (DIN EN ISO 527)
along min. 35%
across min. 35%
Shelf life** 2 years
Application temperature > +10 °C
Service life by specialist application
under vertical outdoor exposure
(normal climate of Central Europe)
5 years
Attention:
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at
least three weeks and to completely cure respectively. The compatibility of selected lacquers and paints should be
tested by the user, prior to application of the material. Furthermore the application information published by ORAFOL
is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.
Technical data
(FINAT TM 14)
* average
(without protective paper and adhesive)
** in original packaging, at 20°C and 50% relative humidity
Resistance to solvents and chemicals at room temperature, 72h after adhesion to aluminium, short