Kapco Water-Resistant “Flame Retardant” Polyester Knit Fabric 50″ X 150′
Great for graphics and banners that need unique look and feel. 100% Polyester Base with no paper backing. For best results use pigmented inks.
Water-Resistant “Flame Retardant” Polyester Fabric
for Water-Based Inkjet Printers
Product Number: KJKNITBAN
Material: Polyester Knit Material
Caliper/Gauge: 7.0 mil
Weight: 150 g/m2
Tensile Strength: 36 lbs.
Gloss Level: 2.0 (avg) @ 60°
nk saturation level of this product 300%. Inkjet coating is designed for use primarily with dye
based inks. Although pigmented inks may be used, a slight color gamut difference may be observed.
Product can be printed on Encad/Kodak, Hewlett-Packard DesignJet (2xxx/3xxx/5xxx),
ColorSpan Displaymaker, Epson Stylus Pro (7xxx/9xxx), Mimaki JV4 (pigmented inks only) and
Roland Hi-Fi Jet (pigmented inks only).
Ink Dry Time: Varies with type and amount of ink, relative humidity
Printing: 60-80° F, 50% Relative Humidity
Ideal Storage Conditions: 70° F (21° C), 50% Relative Humidity, store in original
Handling Requirements: Due to absorptive nature of the coating, avoid
touching the coated surface with bare skin. Always
wear cotton gloves when handling inkjet-coated
materials. Rolls are supplied withthe coated surface
wound out. When rolling graphics, always roll so that the
thinner material is on the outside surface of roll.
Shelf Life: 1 year from ship date when stored in proper conditions.